| MouseOver to Zoom.|
HOME > PVC TYPE I > PLASTIC TUBING
Transfer Tubing for Fuel & Lubricant | Excelon PVC Flexible Piping
Translucent yellow PVC tubing for fuel and lubricant transfer
|Get Your Online Pricing:
Tips for measuring »
How To Measure and Cut-To-Size Policy [X]
Cut-To-Size Items are Non-Returnable!
As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.
Measure Twice, Cut Once
Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring Tape
Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End Hook
The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
|As low as $15/month with |
Excelon Fuel & Lubricant tubing is primarily used to transfer a variety of chemicals and petrochemicals. Perfect for transferring gasoline, oils, kerosene, and more, Excelon Fuel & Lubricant tubing resists the corrosion that can occur over time from exposure to hydrocarbon-based fluids. It is flexible enough to allow for fast installation in small spaces and maintains its flexibility over prolonged periods to reduce the chance of failure due to cracking and leaking.
Excelon Fuel & Lubricant tubing comes in a translucent yellow color to allow for easy flow visibility and identification of the fluids passing through. It is equivalent to Tygon® F-4040-A.
- Resists hardening and swelling
- Translucent yellow - easy to monitor flow of liquids
- Protects against contamination and leaching
- Equivalent to Tygon® F-4040-A
WARNING: This product can expose you to chemicals including Polyvinyl Chloride, CAS 9002-86, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
WARNING: This product can expose you to chemicals including Dioctyl phthalate (DEHP), CAS 117-81-7, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to�www.P65Warnings.ca.gov.
WARNING: This product can expose you to chemicals including Dibutyl phthalate (DBP), CAS 84-74-2, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to�www.P65Warnings.ca.gov.
WARNING: This product can expose you to chemicals including Butyl benzyl phthalate (BBP), CAS 85-68-7, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to�www.P65Warnings.ca.gov.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.
Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored.
Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.