UHMW ROD | NATURAL VIRGIN
 MouseOver to Zoom.






You Might Also be Interested In

Interstate Advanced Materials Membership

UHMW Sheet | Natural Virgin

BLACK UHMW SHEET | VIRGIN BLACK UHMW

TIVAR® H.O.T. UHMW ROD

UHMW TUBE | NATURAL

HOME > UHMW

UHMW ROD | NATURAL VIRGIN

Virgin Ultra High Molecular Weight Polyethylene



 4 stars based on 5 Review(s)
Get Your Online Pricing: Tips for measuring »

How To Measure and Cut-To-Size Policy [X]


Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).




Outside Diameter:

 inches
Length:

 ft
Quantity:



Total Price: $12.79
Cut to 5 foot lengths for optimum shipping. If you need a specific length, please advise your representative.

As low as $1/month with

Overview Specs & Uses Reviews Inquiry
Date Review
2021-07-09UHMW can be a challenge but ordering high quality material from Interstate is not. This material does expand and contract quite easily so if you're trying to hit a tight tolerance then leave some material and let it rest over night before finishing. Good luck with your job!
2018-03-26DO NOT MACHINE - Reprocessed shrinks after machining. Great product for Chute liner. WARNING Don't Use if tolerance required. Sad Waste of Money
2016-10-06Sadly, there isn't a 0 star option. I ordered a few feet of the 1.375" material. It arrived at 1.450-1.460". I called to inquire about possibly being sent the wrong material, and was told they have a +/- 10% tolerance (yet they advertise to 3 decimal places and don't state tolerances anywhere) which is 0.270" of possible fluctuation.
2015-07-28Easy to machine, easy to purchase from Interstate
2014-01-31First time buying from interstate plastics and will def not be the last! Very high quality at an inexpensive price. The customer service was patient, friendly and super helpful on our order. We felt taken care of, happy campers!
Write Your Own Review
Ummm...Not BadPretty CoolGoodGreat!
6dfc9     
Enter the code above:



Interstate Plastics Suppliers