| MouseOver to Zoom.
HOME > UHMW
UHMW-PE SHEET | ANTI-STATIC
Anti-Static Ultra High Molecular Weight Polyethylene
4 stars based on 9 Review(s)
|Get Your Online Pricing:
Sanitizing Acrylic and Polycarbonate »
Tips for measuring & cut-to-size policy »
How To Measure and Cut-To-Size Policy [X]
Cut-To-Size Items are Non-Returnable!
As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.
Measure Twice, Cut Once
Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring Tape
Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End Hook
The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
Sanitizing Acrylic and Polycarbonate Sheet [X]
Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.
Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.
Compatible Polycarbonate Disinfectants:
• sBioMed Steriplex SD
• Safetec Surface Wipes
• Contec Healthcare Perodox RTU
• Contec Healthcare PS-911 EB Prostat Sterile Wipes
Compatible Acrylic Disinfectants:
• Pharmacy Grade Hydrogen Peroxide
• Household Bleach
• Isopropyl Alcohol (Water Diluted to 30% Strength)
[Download as a PDF]
|As low as $2/month with
UHMW (Ultra High Molecular Weight Polyethylene) is a common machinable plastic known for durability, versatility and cost-effectiveness as well as abrasion, impact and chemical resistances. UHMW plastic features a molecular weight that ranges from 3.1 million to 100 million grams per mole, with an abrasion resistance that continues to improve as molecular weight increases.
UHMW's anti-static sheet is the ideal product for applications where static electricity tends to pose problems in manufacturing environments. With a surface resistance of 105 to 109 (ohms/cm2), anti-static UHMW handles tough conditions where dust and static electricity tend to arise, including those in grain elevators and munition plants, effectively safeguarding your materials against static discharges. With high levels of heat and corrosion resistances, UHMW anti-static sheets protect robotics and other products that are sensitive to dust accumulation and electrical charge buildup.
UHMW anti-static sheet is self-lubricating, features no moisture absorption and is available in sheet, rod, board and profiles.
Anti-static UHMW can move products more safely in potentially volatile environments, such as munitions plants, grain handling facilities and explosive assembly facilities (air-bags) where a spark can cause a dust explosion. Anti-static UHMW protects products sensitive to build-up of electrical charges.
Modified to exhibit anti-static properties, its surface resistance ranges from 105 to 109 (ohms/cm2). Anti-static UHMW is available in sheet, rod, board and profiles and is compounded for situations where dust and static electricity pose significant problems.
Low Coefficient of Friction
Anti-static UHMW is used in applications where high levels of friction are likely to arise including conveyor guard rails, augers and wear strips, belt scrapers, chain guides, and idler rollers. Due to an extremely low coefficient of friction, its inherent lubricity minimizes heat-generating friction that tends to gradually destroy steel parts, and ensures smooth, noiseless operation.
High durability, low friction and wear resistance are key reasons why anti-static UHMW is the material of choice for a myriad of applications. Anti-static UHMW offers an extremely low coefficient of friction due to a specialized built-in lubricant that replaces unwanted grease and oil. It also enhances efficiency and productivity in many applications. Anti-static UHMW is self-lubricating formula helps to extend part life because the internal lubricant ensures that parts will not break or need replacement.
[UHMW-PE Anti-Static - PDF Spec Sheet]
[UHMW - PDF Spec Sheet]
- Resists static buildup
- Extremely high abrasion resistance
- Outstanding impact strength, even at low temperatures
- Extremely low coefficient of friction
- Easily machined with common woodworking tools
- Great chemical resistance
NEED A UHMW SAMPLE?
Machinable Plastics Material Sample Pack
Impact Strength Material Sample Pack
Friction Resistance Material Sample Pack
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.
Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored.
Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.