Bearing & Wear Plastics


Products Displayed: 86
Title  

Description 
ACETAL ROD | 13% AF BLEND
Acetal AF blend has excellent sliding/friction/wear properties.
ACETAL ROD | 13% AF BLEND

ACETAL SHEET | 13% AF BLEND
Acetal AF has excellent friction, wear specs. Acetal structure similar to Delrin grades Delrin AF.
ACETAL SHEET | 13% AF BLEND

ACETAL ROD | BLACK
Acetal is a tough, stable engineering thermoplastic.
ACETAL ROD | BLACK

ACETAL MATERIAL | BLACK EXTRUDED SHEET
Black acetal & acetal material. Acetal plastic properties make it a tough engineering thermoplastic.
ACETAL MATERIAL | BLACK EXTRUDED SHEET

Delrin® Rod | Black Acetal Homopolymer
Acetal homopolymer (Delrin) has more mechanical strength and stiffness than acetal copolymer.Delrin<sup>®</sup> Rod | Black Acetal Homopolymer

DELRIN PLASTIC SHEET | BLACK
Delrin plastic and delrin black (delrin sheet) bridge the gap between metals and plastic.
DELRIN PLASTIC SHEET | BLACK

ACETAL PLASTIC SHEET | ACETAL COPOLYMER | NATURAL COLOR
Acetal copolymer. Good wear properties low friction acetal plastic sheet.
ACETAL PLASTIC SHEET | ACETAL COPOLYMER | NATURAL COLOR

Delrin® Rod | Natural Acetal Homopolymer
Acetal homopolymer (Delrin) has more mechanical strength and stiffness than acetal copolymer.Delrin<sup>®</sup> Rod | Natural Acetal Homopolymer

DELRIN® SHEET | NATURAL
Delrin vs Acetal - Delrin sheets and Delrin plastic offer an excellent balance of properties.
DELRIN<sup>®</sup> SHEET | NATURAL

ESD ACETAL SHEET | NATURAL ESD GRADE
ESD Acetal contains no carbon fibers or powders and is for clean room use.
ESD ACETAL SHEET | NATURAL ESD GRADE

VESPEL® SHEET | NATURAL SP-1
Dupont Vespel® polyimide: a high temperature, creep resistant material.
VESPEL<sup>®</sup> SHEET | NATURAL SP-1

VESPEL® ROD | NATURAL SP-21
Dupont Vespel® high-performance polyimide.
VESPEL<sup>®</sup> ROD | NATURAL SP-21

OUTRIGGER PAD | HEAVY DUTY | 1 IN. THICK
Our line of outrigger and jack pads will exceed your requirements.
OUTRIGGER PAD | HEAVY DUTY | 1 IN. THICK

NYLON BLUE MD TUBE | OIL FILLED NYLON
Nylatron GSM PA6 (nylon blue) should be considered for any oil-filled Nylon application.
NYLON BLUE MD TUBE | OIL FILLED NYLON

NYLOIL® CAST GREEN | NYLON ROD
Nyloil rod offers great toughness, dimensional stability, wear resistance, and versatility.
NYLOIL<sup>®</sup> CAST GREEN | NYLON ROD

NYLOIL® NYLON SHEET | CAST NYLON SELF-LUBRICATING PLASTIC SHEET
An internally lubricated cast nylon 6 sheet with high strength and reduced friction properties.NYLOIL<sup>®</sup> NYLON SHEET | CAST NYLON SELF-LUBRICATING PLASTIC SHEET

Nylon 6 Tube | Nyloil® Oil Filled Green Nylon Tube
Self-lubricating cast nylon tube with improved dimensional stability over standard cast nylon.Nylon 6 Tube | Nyloil<sup>®</sup> Oil Filled Green Nylon Tube

NYLON TUBE | GRAY MD TUBULAR NYLON BARS
Gray tubular nylon bars available for use in various applications.
NYLON TUBE | GRAY MD TUBULAR NYLON BARS

NYLON MD ROD | CAST MD GRADE SOLID NYLON ROD
Solid nylon rod has a good combination of toughness, wear resistance, and versatility.
NYLON MD ROD | CAST MD GRADE SOLID NYLON ROD

Gray MD Nylon Sheet | Cast Nylon 6 MD
Nylon MD has a low coefficient of friction, good wear resistance, toughness, & light weight.Gray MD Nylon Sheet | Cast Nylon 6 MD

NYLON ROD | EXTRUDED ROUND MD NYLON 66 ROD
Nylon 66 rod in MD grade is tough, dimensionally stable, wear resistant, and versatile.
NYLON ROD | EXTRUDED ROUND MD NYLON 66 ROD

NYLON | NATURAL CAST NYLON STOCK SHEET
Nylon stock, nylon plate, and nylon products are tough, dimensionally stable & wear resistant.
NYLON | NATURAL CAST NYLON STOCK SHEET

FOOD GRADE NYLON ROD | NATURAL NYLOIL FG NYLON
Food grade nylon is self lubricating. Nylon food grade nylon rod is approved for food contact.
FOOD GRADE NYLON ROD | NATURAL NYLOIL FG NYLON

NYLON TUBES | NATURAL CAST TUBULAR BAR
Nylon tubes and nylon bar have a good combination of toughness and wear resistance.
NYLON TUBES | NATURAL CAST TUBULAR BAR

NYLON PLASTIC MATERIAL | NYLON 6 6 EXTRUDED SHEET
Nylon Plastic Material Type Nylon 6 6 Sheet. Extrusion Grade Nylon 66 Sheet.
NYLON PLASTIC MATERIAL | NYLON 6 6 EXTRUDED SHEET

HYDLAR Z NYLON ROD | POLYAMIDE 66 ABRASION RESISTANT PLASTIC
Hydlar Z nylon PA66 rod is an abrasion resistant plastic with great wear properties.HYDLAR Z NYLON ROD | POLYAMIDE 66 ABRASION RESISTANT PLASTIC

HYDLAR Z PLASTIC NYLON SHEET | POLYAMIDE 66 ABRASION RESISTANT PLASTIC
Hydlar Z nylon PA66 sheets are abrasion resistant plastic sheets with great wear properties.HYDLAR Z PLASTIC NYLON SHEET | POLYAMIDE 66 ABRASION RESISTANT PLASTIC

NYLATRON PLASTIC 703XL PA6 | NYLON 6
Nylatron 703XL PA6 provides an extraordinary amount of control for high precision applications.NYLATRON PLASTIC 703XL PA6 | NYLON 6

NYLATRON NSM | NYLON CAST ROD
Nylatron NSM nylon stands up to demanding applications, perfect when larger size parts are required.
NYLATRON NSM | NYLON CAST ROD

NYLATRON® NYLON NSM CAST SHEET
Nylatron NSM is considered better than cast nylon rod and nylon rod stock for large part sizes.
NYLATRON<sup>®</sup> NYLON NSM CAST SHEET

NYLATRON MC901 BLUE NYLON | CAST NYLON ROD
Nylatron MC901 blue nylon should be considered for wheels, gears, and custom parts.NYLATRON MC901 BLUE NYLON | CAST NYLON ROD

NYLATRON MC901 BLUE NYLON | CAST NYLON SHEET
Nylatron MC901 blue nylon should be considered for wheels, gears, and custom parts.NYLATRON MC901 BLUE NYLON | CAST NYLON SHEET

TORLON® SHEET | NATURAL 4203
Torlon is the highest performing melt processable plastic. It has superior resistance to heat.
TORLON<sup>®</sup> SHEET | NATURAL 4203

Torlon® 4203 Tube | Natural
With its superior heat resistance, Torlon is the highest performing melt processable plastic.
Torlon<sup>®</sup> 4203 Tube | Natural

TORLON® ROD | NATURAL #4301
Excellent wear resistance in bearing grades. Endures high heat, chemical and stress conditions.
TORLON<sup>®</sup> ROD | NATURAL #4301

TORLON® SHEET | NATURAL 4301
Excellent wear resistance in bearing grades. Endures high heat, chemical and stress conditions.
TORLON<sup>®</sup> SHEET | NATURAL 4301

ULTEM® ROD | NATURAL
Ultem offers high strength and excellent resistance to flame and heat.
ULTEM<sup>®</sup> ROD | NATURAL

PEEK ROD | BLACK PEEK PLASTIC
Black PEEK rods suitable for PEEK machining and outdoor use.
PEEK ROD | BLACK PEEK PLASTIC

PEEK SHEET | BLACK PEEK PLASTIC
Black PEEK sheets suitable for PEEK machining, PEEK bushings, and various applications.PEEK SHEET | BLACK PEEK PLASTIC

PEEK ROD | NATURAL
PEEK is high heat resistant engineered thermoplastic with excellent chemical and fatigue resistance.
PEEK ROD | NATURAL

PEEK SHEET | NATURAL
PEEK is high heat resistant engineered thermoplastic with excellent chemical and fatigue resistance.
PEEK SHEET | NATURAL

PEEK Unfilled Natural PolyEtherEtherKetone Tube
Unfilled natural PEEK tube has very good resistance to chemicals, abrasion, and wear.PEEK Unfilled Natural PolyEtherEtherKetone Tube

Black PEEK Rod | Bearing Grade PEEK HPV Material
Bearing grade PEEK HPV has the lowest coefficient of friction (COF) of all PEEK grades.Black PEEK Rod | Bearing Grade PEEK HPV Material

PEEK ROD | NATURAL GLASS 30%
PEEK is high heat resistant engineered thermoplastic with excellent chemical and fatigue resistance.
PEEK ROD | NATURAL GLASS 30%

PET Sheet | Black Rigid Sheet
A lightweight and strong material, PET plastic is commonly used to package foods.PET Sheet | Black Rigid Sheet

PET SHEET | GRAY TX
An internally lubricated thermoplastic polyester providing enhanced wear and inertness.
PET SHEET | GRAY TX

PET SHEET | NATURAL
PET is a strong and lightweight plastic that is widely used for packaging foods.
PET SHEET | NATURAL

CE PHENOLIC | PHENOLIC ROD | CANVAS PHENOLIC
Of the phenolic sheet grades, CE grade phenolic rod is considered 'electrical' grade.CE PHENOLIC | PHENOLIC ROD | CANVAS PHENOLIC

PHENOLIC SHEET | NATURAL CANVAS
"C" Grade Natural Canvas Phenolic Sheet
PHENOLIC SHEET | NATURAL CANVAS

LE PHENOLIC | PHENOLIC ROD | LINEN PHENOLIC
LE phenolic rods have excellent electrical properties that regular linen phenolic rods do not.LE PHENOLIC | PHENOLIC ROD | LINEN PHENOLIC

PHENOLIC SHEET | NATURAL LE
Natural LE Phenolic Sheet.
PHENOLIC SHEET | NATURAL LE

PHENOLIC ECONOMY SHEET | NATURAL PAPER
Natural Paper Phenolic Sheet - Economy
PHENOLIC ECONOMY SHEET | NATURAL PAPER

Techtron® HPV PPS | Bearing Grade PPS
Techtron HPV PPS has outstanding chemical resistance, great wear resistance, and is flame retardant.Techtron<sup>®</sup> HPV PPS | Bearing Grade PPS

PTFE Tube | Semi-Rigid PTFE Fluoropolymer Tubing
Extruded PTFE tubes withstand high heat temperatures, corrosion, and harsh chemicals.PTFE Tube | Semi-Rigid PTFE Fluoropolymer Tubing

PTFE RODS | MECHANICAL
PTFE rods resist heat and chemicals. PTFE block is used for low friction applications.
PTFE RODS | MECHANICAL

PTFE | VIRGIN EXTRUDED NATURAL PTFE SHEETING
PTFE sheeting and Teflon PTFE sheet are used in extremely low friction applications.
PTFE | VIRGIN EXTRUDED NATURAL PTFE SHEETING

PTFE SHEET | NATURAL VIRGIN GRADE
PTFE sheet and PTFE Teflon sheet are low friction. PTFE sheets resist heat, chemicals, & corrosion.
PTFE SHEET | NATURAL VIRGIN GRADE

PTFE TUBE | NATURAL
PTFE tubing has the lowest coefficient of friction of any plastic and allows build-up free flow.
PTFE TUBE | NATURAL

TURCITE A | TURCITE KIT - ROD
Self-lubricating engineered thermoplastic turcite kit.
TURCITE A | TURCITE KIT - ROD

UHMW ROD | BLACK REPROCESSED
Reprocessed UHMW is recommended for less demanding applications versus virgin.
UHMW ROD | BLACK REPROCESSED

UHMW SHEET | BLACK REPROCESSED
Reprocessed UHMW is recommended for less demanding applications versus virgin.
UHMW SHEET | BLACK REPROCESSED

UHMW Black Rod | Virgin UHMW Polyethylene
Virgin grade black UHMW rod stock has good wear, chemical, & impact resistances.UHMW Black Rod | Virgin UHMW Polyethylene

BLACK UHMW SHEET | VIRGIN BLACK UHMW
Black uhmw sheet, virgin grade, for general purpose use.BLACK UHMW SHEET | VIRGIN BLACK UHMW

UHMW SHEET | GREEN REPROCESSED
Reprocessed UHMW is recommended for less demanding applications versus virgin.UHMW SHEET | GREEN REPROCESSED

UHMW IPX 2000® SHEET | ADVANCED WEAR TECHNOLOGY
IPX 2000 is an advanced, engineered polyethylene that has greater benefits than standard UHMW.
UHMW IPX 2000<sup>®</sup> SHEET | ADVANCED WEAR TECHNOLOGY

UHMW NATURAL SNAP-ON-EPP801
Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
UHMW NATURAL SNAP-ON-EPP801

UHMW NATURAL SNAP-ON-EPP803
Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
UHMW NATURAL SNAP-ON-EPP803

UHMW NATURAL SNAP-ON-EPP804
Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
UHMW NATURAL SNAP-ON-EPP804

UHMW NATURAL SNAP-ON-EPP824
Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
UHMW NATURAL SNAP-ON-EPP824

UHMW NATURAL SNAP-ON-EPP825
Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
UHMW NATURAL SNAP-ON-EPP825

UHMW NATURAL SNAP-ON-EPP851
Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
UHMW NATURAL SNAP-ON-EPP851

UHMW NATURAL C CHANNEL-EPP702
Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
UHMW NATURAL C CHANNEL-EPP702

UHMW NATURAL C CHANNEL-EPP703
Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
UHMW NATURAL C CHANNEL-EPP703

UHMW NATURAL FULL-ROUND-EPP350
Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
UHMW NATURAL FULL-ROUND-EPP350

UHMW NATURAL FULL-ROUND-EPP351
Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
UHMW NATURAL FULL-ROUND-EPP351

UHMW NATURAL FULL-ROUND-EPP352
Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
UHMW NATURAL FULL-ROUND-EPP352

UHMW NATURAL HALF ROUND-EPP301
Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
UHMW NATURAL HALF ROUND-EPP301

UHMW NATURAL HALF ROUND-EPP302
Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
UHMW NATURAL HALF ROUND-EPP302

UHMW NATURAL U CHANNEL-EPP104
Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
UHMW NATURAL U CHANNEL-EPP104

UHMW NATURAL ANGLE-EP202
Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
UHMW NATURAL ANGLE-EP202

UHMW NATURAL ANGLE-EP203
Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
UHMW NATURAL ANGLE-EP203

UHMW NATURAL ANGLE-EP208
Fast economical way to turn an abrasive metal component into a long wearing, non marring component.
UHMW NATURAL ANGLE-EP208

UHMW TUBE | NATURAL
UHMW is a relatively low cost abrasion, impact, and chemically resistant material.
UHMW TUBE | NATURAL

UHMW SHEET | NATURAL VIRGIN
Virgin UHMW is a relatively low cost abrasion, impact, and chemically resistant material.
UHMW SHEET | NATURAL VIRGIN

UHMW NATURAL KING COIL
Ideal solution for conveying applications where long lengths with no seams are preferred.
UHMW NATURAL KING COIL

UHMW BLACK REPROCESSED KING COIL
Ideal solution for conveying applications where long lengths with no seams are preferred.
UHMW BLACK REPROCESSED KING COIL



Interstate Plastics Suppliers