FRP Panels (Fiberglass Reinforced Panels) | Color, White, Black FRP Wall Panels

Class C & Class A fiberglass reinforced plastic panels, fiberglass reinforced plastic, and other fiberglass paneling, ideal for new or retrofit construction.

We carry a full line of ASTM D-5319 rated Nudo FiberLite FRP panels, a fiberglass reinforced plastic panel that is ideal for new or retrofit construction. Our FRP panels install directly to solid wall surfaces or can be used for drop-in ceilings. FiberLite panels provide durability, easy maintenance and sanitation with exceptional physical and mechanical properties.

FiberLite FRP liner panels adhere directly to gypsum or plywood with a variety of different trowel-on adhesives. FiberLite? is available in a standard 0.090" thickness. A wide selection of sizes, colors, textures and fire ratings are readily available upon request.


What is Nudo FiberLite FRP?

Nudo fiberglass reinforced plastic panels are popularly used in bathrooms and hallways, in kitchens and other food-processing and food-preparation areas, and in water and wastewater treatment plants. It is resistant to chemical exposure, impact, moisture, scratching, shattering, and thermal shock.

FiberLite cleans easily with steam, high-pressure sprayers, or soap and water and is USDA and Agriculture Canada certified. It is available with either a Class A or Class C fire rating and meets ASTM D-5319 standard specification for glass-fiber reinforced polyester wall and ceiling panels.

FiberLite is highly customizable with extensive color and size options and either a smooth or embossed texture. Interstate Plastics also offers color-matched connecting profiles (caps, corners, covers, and division bars)for easy installation.

FiberLite FRP panels (without pre-laminated substrate) should only be installed over a sold wall surfaces (wood, drywall, etc.) It should NOT be applied directly to wood or metal studs. Wall surfaces should be clean, flat, dry and smooth. Uneven wall surfaces should be corrected for best results. FiberLite FRP may form and contour to wall surface that are not prepared prior to installation. Follow the manufacturers adhesive application guidelines.

[PDF: Installation Guidelines]

[PDF: Technical Data]

Nudo FiberLite FRP Features
  • Durable, shatter resistant surface that resists scratches
  • 100% moisture resistant
  • USDA and Agriculture Canada certified
  • Thermal shock and chemical resistant
  • Cleans easily with steam, high pressure sprayers or soap/water
  • Extensive color options on textured or smooth surface improves design flexibility
  • Class A or Class C fire-rating available
  • Color-matched moldings and fasteners available for easy installation
  • High impact strength
  • Low maintenance
  • Meets ASTM D-5319 standard specification for glass-fiber reinforced polyester wall & ceiling panels
Nudo FiberLite FRP Colors
Nudo FRP Colors
Nudo FiberLite FRP Affixing

Use of moldings and silicone sealant with panels is recommended to achieve a moisture resistant installation. Cut molding to size and place silicone sealant into channel of molding during installation. Place molding on panel before fastening and place small amount of silicone into hold before fastening. (Typical vinyl molding used with .090 FiberLite FRP V-1, V-3, V-5 and V-7.)

You should always apply 100% adhesive coverage to back of panel when installing Fiber-Lite FRP panels. Titebond adhesives are recommended. Refer to adhesive manufacturers guidelines for adhesive acceptable for use on drywall, plywood, OSB and gypsum walls, etc.

If using fasteners in combination with adhesive in high moisture areas, the use of non-corroding fasteners such as plastic pin rivets, chrome pin rivets, one piece nylon rivets, one stepper fasteners or screws should be considered. When installing with fasteners, always select proper size, they should be fit snug, but should not be over-tightened. Fasteners holes should be slightly oversized to allow for expansion and contraction.

Adhesive can be removed from panels surface by using mineral spirits or equivalent solvent based cleaners.

Affixing Notes:

  • FiberLite FRP panels should be adhered to a solid surface.
  • The first panel installed should be set true with a plumb line.
  • Check plumb line during installation.
  • Do not fasten the edges of the panel until the moldings are in place (except when using face mounted moldings.)
  • Fasten the panels at the center and work outward.
  • Fasteners should be staggered on opposite panel edges and next to division bar for a flat seam.
  • FiberLite FRP panels may be pre-drilled for fasteners installation using a guide panel.

Installation Tips:

  • Follow safety and fire guidelines during installation and use of panels. Compliance with local building codes is recommended.
  • Pre-condition panels prior to installation and allow for expansion and contraction during installation.
  • Use moldings, silicone, fasteners, and adhesive with panels for best installation.
  • Remove excess silicone during installation or trim after silicone is cured.
  • Place molding on panels, if required before fastening panels (i.e. CAP, ISC, OSC, etc.).
  • Cut moldings as needed. For example, a division bar may need to be cut in accommodate a ceiling or base cover.
  • Cut panels, if required, for proper installation.
  • Use hold-down clips if panels are used in a suspended ceiling.
  • Span studs or joists only with proper thickness of panel.
  • Clean panels, if required, after installation.
Nudo FiberLite FRP Cleaning

FiberLite FRP panels are designed for minimum care and maintenance. When cleaning panels they should be washed with a light detergent. Panels may also be cleaning with steam, high pressure sprayers or soap and water.

A 5% or 10% Tri Sodium Phosphate water solution may also be used to clean panels. Rinse thoroughly after applying. Hard water deposits may be cleaned with a 10% solution of Acetic Acid in cold water. Rinse thoroughly after applying. It is strongly recommended not to use abrasive cleaners when cleaning panels.

Product Title
Product Description
Fiberlite FRP Panels are fiberglass sheeting made for interior, moisture resistant environments and are ideal for new or retrofit construction.
Fiberglass reinforced plastic. Class A rated FRP panels and fiberglass paneling.
Fiberlite FRP Panels are fiberglass sheeting made for interior, moisture resistant environments and are ideal for new or retrofit construction.
Fiberglass reinforced plastic. Class A rated FRP panels and fiberglass paneling.
Fiberlite FRP Panels are fiberglass sheeting made for interior, moisture resistant environments and are ideal for new or retrofit construction.
Fiberglass reinforced plastic. Class A rated FRP panels and fiberglass paneling.
Fiberlite FRP Panels are fiberglass sheeting made for interior, moisture resistant environments and are ideal for new or retrofit construction.
Fiberglass reinforced plastic. Class A rated FRP panels and fiberglass paneling.
Fiberlite FRP paneling is fiberglass reinforced plastic made for interior, moisture resistant environments. They are perfect for new or retrofit construction.
Fiberglass reinforced plastic. Class A rated FRP panels and fiberglass paneling.
Fiberlite FRP paneling is fiberglass reinforced plastic made for interior, moisture resistant environments. They are perfect for new or retrofit construction.
NUDO FIBERLITE FRP EMBOSSED - CLASS C (#LP-F9) ALMOND SHEET
Fiberlite FRP paneling is fiberglass reinforced plastic made for interior, moisture resistant environments. They are perfect for new or retrofit construction.
NUDO FIBERLITE FRP SMOOTH - CLASS C (#LP-S9) ALMOND SHEET
Fiberlite FRP paneling is fiberglass reinforced plastic made for interior, moisture resistant environments. They are perfect for new or retrofit construction.
NUDO FIBERLITE FRP EMBOSSED - CLASS C (#LP-F9) PEARL GRAY SHEET
FRP panels from Nudo are made for interior, moisture resistant environments. They are perfect for new or retrofit construction.
NUDO FIBERLITE FRP SMOOTH - CLASS C (#LP-S9) PEARL GRAY SHEET
FRP panels from Nudo are made for interior, moisture resistant environments. They are perfect for new or retrofit construction.
NUDO FIBERLITE FRP EMBOSSED - CLASS C (#LP-F9) BEIGE SHEET
FRP panels from Nudo are made for interior, moisture resistant environments. They are perfect for new or retrofit construction.
NUDO FIBERLITE FRP EMBOSSED - CLASS C (#LP-F9) WHITE SHEET
Class A fire rated USDA, FDA, and LA County compliant decorative panels for walls and ceilings.

NUDO CERAMICSTEEL - PORCELAIN ENAMELED STEEL SURFACE SHEET
Nudo profiles are easily cut, drilled, and machined with standard tools.
NUDO FIBERLITE FRP V-3 DIVISION BAR (.88' FACE)
Nudo profiles are easily cut, drilled, and machined with standard tools.
NUDO FIBERLITE FRP V-1 CAP (.5' / .9' LEGS)
Nudo profiles are easily cut, drilled, and machined with standard tools.
NUDO V-5 INSIDE CORNER & COVER (.63' COVER /.70' LEG)
Nudo profiles are easily cut, drilled, and machined with standard tools.
NUDO V-7 OUTSIDE CORNER FOR .090' PANEL (.5' LEGS)

Interstate Plastics Suppliers