As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade.Please review our full return and shipping policy here.
Measure Twice, Cut Once
Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring Tape
Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End Hook
The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
Hydlar® Z natural rod is an aramid fiber filled nylon rod that exhibits excellent wear properties and is easily machinable. It is an abrasion resistant plastic with the chemical designation polyamide 66. Its great strength and stiffness in addition to its good mechanical load bearing capacity makes it a good fit for applications such as construction, conveyor technologies, power engineering, mechanical engineering, and gear manufacturing.
In general, nylon plastic is a strong, stiff mechanical and engineering machinable thermoplastic with outstanding toughness, dimensional stability, wear resistance, availability, and versatility. Perfect for bearing and wear applications, nylon is frequently used to replace metal bearings and bushings, many times eliminating need for external lubrication.
Nylon has served well in replacing many metals and offers a design choice when noise reduction and long life are important.
Handling: Cut materials may have sharp edges. We recommend wearing protective gloves when unpacking and handling this material to ensure safety.
Suitability: We take pride in the quality of our materials as they leave our facility. However, because every project is unique, we cannot account for how materials are modified, stored, or used after delivery. Please perform the necessary tests to ensure this material is right for your specific application and end-use conditions.
