As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade.Please review our full return and shipping policy here.
Measure Twice, Cut Once
Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring Tape
Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End Hook
The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
Sanitizing Acrylic and Polycarbonate Sheet [X]
Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.
Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.
Interstate Plastics proudly offers our newest addition to our line of Kydex® products. Customers asked and we provided this multi-environment camouflage (Multi-Cam) as a novelty pattern. We start with Kydex® brand material and, using thermo-digital technology, we apply a special coating for custom patterns.
The Kydex material and pattern are for novelty purposes only and are not intended or designed for use as military spec camouflage under any circumstances. Interstate Plastics is in no way affiliated with any military branch, tactical force or any other academic institution.
Other colors and patterns are available with minimal set up charges, such as multi-cam camouflage or custom prints. We are even able to put your company logo on the material to boost your brand recognition. If you frequently make the same holster or sheath, ask us about receiving CNC machined blanks, with or without pilot holes for rivets, rather than just buying material and cutting by hand. Minimum order requirements are surprisingly affordable. CALL (888) 768-5759 today!
Kydex® sheet is an extremely durable Acrylic-PVC alloy extruded in a range of colors, textures, and patterns. Kydex® thickness ranges from .028 to .250 and full sheets are available in 48" x 96" and 48" x 120 ft rolls. Kydex® can be thermoformed, post formed, brake formed and laminated.
Currently being used mostly for gun holstering and knife sheaths, we expect to expand this line into other patterns and markets. Ask us about your special needs or patterns; we can print anything onto our special line of Kydex® materials.
Thermoformable without any special tools or equipment.
Easily form into any shape: Commonly used for knife sheaths, gun holsters, and cell phone/tablet covers.
Comes in a range of colors, textures and camouflage patterns.
Acrylic-PVC Alloy material
Material Warnings
WARNING: This product can expose you to chemicals including Acrylonitrile, CAS 107-13, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov .
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.
Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored.
Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.
Currently being used mostly for gun holstering and knife sheaths, we expect to expand this line into other patterns and markets. Ask us about your special needs or patterns; we can print anything onto our special line of Kydex® materials.
Applications range from gun and knife holsters and sheaths to medical equipment housings and aircraft trays, tables, and fixtures. No other thermo-plastic sheet stands up to impact, scratches, and gouging like Kydex®. Kydex® is very easy to clean: tough stains, scuffs, and graffiti can be gotten rid of using strong cleaners with no staining or surface damage to the material. Kydex® sheets are also available with fire ratings of ul94v-o and 5v. Kydex® is used by the orthopedic industry for braces.
Date
Review
2013-02-08
Looks great. I need to order some more Kydex from you just hadn't had a chance to yet. Everyone I run into asks me about mine and I send them to your website. Thanks for sharing as always.
2013-01-25
As a born skeptic, we pay close attention to reviewers' criticisms about products if we are going to put our name on it. We have made a living off of creating custom holsters for hunting and fishing (knives). Took a risk. Bought it. We have gotten nothing but rave reviews.
2013-01-24
Disappointed. The patern is very pixilated and looks like it was done with a printer from the 80's to top that it was "printed" on BLACK Kydex, how the heck is that going to blend into my rig. Even dark brown would be better let alone tan. Looks like a sticker from my home printer on a piece of Kydex. Too costly + shipping for what you get.
2013-01-21
Using the name Multicam is quite misleading. Upon looking at it in person, it is immediately obvious that this is a knockoff of the real thing. The colors are off, entirely too light and green. The pattern doesn't match either. The pattern itself looks like a pixelated blown up version of a low res photo- Other than that, it forms fine, like any other kydex.
2012-12-14
Made a holster rig for my Beretta from this stuff, its formed very easily. I will be buying more in the near future!
2012-11-19
The new multicam print is so awesome, thank you guys!