As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade.Please review our full return and shipping policy here.
Measure Twice, Cut Once
Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring Tape
Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End Hook
The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
Sanitizing Acrylic and Polycarbonate Sheet [X]
Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.
Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.
THERE IS A $175 CRATING FEE ON ALL NUDO FIBERLITE FRP ONLINE ORDERS.
FiberLite FRP is a fiberglass reinforced plastic panel that is ideal for new or retrofit construction. These panels install directly to solid wall surfaces or can be used for drop-in ceilings. FiberLite FRP panels are specially engineered to provide durability, easy maintenance and sanitation with exceptional physical and mechanical properties.
FiberLite FRP liner panels are made for interior, moisture resistant environments. They are adhered directly to gypsum or plywood with a variety of different trowel-on adhesives. FiberLite® is available in a standard 0.090" thickness. A wide selection of sizes, colors, textures and fire ratings are readily available upon request.
Popular applications and industries for Nudo FiberLite FRP include food processing, kitchen and food preparation areas, bathrooms and hallways, water and wastewater treatment plants.
Durable, shatter resistant surface that resists scratches
100% moisture resistant
USDA and Agriculture Canada certified
Thermal shock and chemical resistant
Cleans easily with steam, high pressure sprayers or soap/water
Extensive color options on textured or smooth surface improves design flexibility
Class A or Class C fire-rating available
Color-matched moldings and fasteners available for easy installation
High impact strength
Low maintenance
Meets ASTM D-5319 standard specification for glass-fiber reinforced polyester wall & ceiling panels
Handling: Cut sheets may have sharp edges. We recommend wearing protective gloves when unpacking and handling this material to ensure safety.
Suitability: We take pride in the quality of our materials as they leave our facility. However, because every project is unique, we cannot account for how materials are modified, stored, or used after delivery. Please perform the necessary tests to ensure this material is right for your specific application and end-use conditions.
FIBAE SH
Kitchens and Food Preparation Areas
Bathrooms and Hallways
Food Processing Plants
Water and Wastewater Treatment Plants
Nudo® FiberLite FRP Embossed | Class C (#LP-F9) Almond Sheet Questions?
