As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade.Please review our full return and shipping policy here.
Measure Twice, Cut Once
Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring Tape
Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End Hook
The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
Sanitizing Acrylic and Polycarbonate Sheet [X]
Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.
Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.
Moisture-Resistant Class C FRP for Interior Walls and Ceilings
Nudo® FiberLite FRP Embossed Class C (#LP-F9) White Sheet is a fiberglass reinforced plastic panel designed for washable interior wall and ceiling finishes. This nominal 0.090-inch panel features a white pebble-embossed surface and can be used in both new construction and retrofit projects.
FiberLite FRP's moisture-resistant, impact-resistant surface is a good fit for commercial interiors where sanitation and routine cleaning are important. These panels install over prepared solid wall surfaces such as gypsum or plywood and may also be specified for drop-in ceiling systems after confirming compatibility.
Important Note:Full-sheet Nudo FiberLite FRP online orders include a $175 crating fee. Call us for available cut-to-size options before ordering.
Why Choose This Specific Sheet?
This LP-F9 panel combines a white embossed finish with fire performance for interior wall and ceiling applications. It is the right choice when you need:
White Pebble-Embossed Finish:
Provides a textured decorative face for commercial wall and ceiling applications.
ASTM E84 Class C Classification:
Reported flame spread index of 200 or less and smoke developed index of 450 or less for a Class C interior finish classification.
Moisture Resistance:
Designed for interior environments exposed to humidity, splashes, and routine cleaning procedures.
Impact-Resistant Surface:
Fiberglass reinforcement provides durability for corridors, processing areas, kitchens, and other frequently used interiors.
Washable Construction:
The panel can be cleaned using a mild liquid detergent and a soft, nonabrasive cloth. Confirm disinfectant and other cleaning chemical compatibility with manufacturer guidelines before use.
Class C vs. Class A FiberLite FRP
Both grades provide washable FRP wall and ceiling surfaces, but their ASTM E84 fire classifications differ.
Choose Class C FiberLite FRP (This Sheet) when the project requires a durable white embossed interior finish and applicable building codes permit a Class C panel.
Choose Class A FiberLite FRP when the project specification or local code requires a flame spread index of 25 or less and a smoke developed index of 450 or less. Confirm all applicable code and project requirements before selecting a panel.
FiberLite FRP should be installed over a clean, dry, smooth, solid wall surface using an adhesive compatible with both the panel and substrate. Unbacked panels should not be installed directly over open studs, concrete, concrete block, or non-insulated exterior walls. Before installation, acclimate the panels and account for normal expansion and contraction. When cutting, use appropriate eye and respiratory PPE and position the panel so the saw blade enters the decorative side first to help reduce edge chipping.
Pictured: Nudo Color Swatches
Watch: What Are Nudo® FiberLite Fiberglass Reinforced Panels (Class C) FRP?
Handling: Cut sheets may have sharp edges. We recommend wearing protective gloves when unpacking and handling this material to ensure safety.
Suitability: We take pride in the quality of our materials as they leave our facility. However, because every project is unique, we cannot account for how materials are modified, stored, or used after delivery. Please perform the necessary tests to ensure this material is right for your specific application and end-use conditions.
FIBWE_SH
Technical Performance
Nudo® FiberLite FRP Embossed Class C (#LP-F9) White Sheet is a solid panel composed of fiberglass and calcium carbonate-filled polyester resin with a pebble-embossed decorative face. It is designed for washable interior wall and ceiling finishes and complies with ASTM D5319.
ASTM E84 tested and reported as a Class C interior finish.
Mechanical Strength:
Offers dependable flexural and tensile strength for interior wall and ceiling panel applications.
Impact Performance:
Provides solid impact resistance for frequently used commercial interiors.
Water Absorption:
Features low water absorption to support use in moisture-prone interior environments.
Key Properties
Panel Construction:
Solid fiberglass and calcium carbonate-filled polyester resin construction for interior wall and ceiling applications.
Surface and Color:
White, color-through panel with a pebble-embossed decorative face and a smooth backside.
Washable Surface:
Designed for cleaning with a mild liquid detergent and a soft, nonabrasive cloth. Confirm disinfectant and other cleaning chemical compatibility with manufacturer guidelines before use.
Sanitation Requirements:
Manufacturer documentation states that FiberLite FRP meets USDA guidelines for applicable wall and ceiling installations.
Standard Compliance:
Complies with ASTM D5319 requirements for glass-fiber reinforced polyester wall and ceiling panels.
Common Commercial Applications
Kitchens and Food Preparation Areas: Washable interior wall and ceiling surfaces where moisture resistance and routine sanitation are required.
Bathrooms and Hallways: Impact-resistant wall protection for humid environments and frequently used corridors.
Food Processing Plants: Interior liner panels for processing, packaging, storage, and sanitation areas.
Water and Wastewater Facilities: Interior wall and ceiling finishes in locations exposed to humidity, splashes, and compatible cleaning chemicals.
Engineering Limitations & Alternatives
FiberLite LP-F9 is intended for interior wall and ceiling finishes. Project conditions, building codes, substrates, and chemical exposure should be reviewed before installation:
Fire-Rating Requirements: This panel carries a Class C surface-burning classification and does not meet specifications requiring a Class A finish. Better Alternative: When a flame spread index of 25 or less is required, consider Nudo FiberLite FRP Embossed Class A White Sheet.
Installation Substrate: FiberLite FRP should be installed over a prepared solid wall surface and should not be applied directly to open studs, concrete, or concrete block. Better Alternative: or projects requiring a substrate-backed panel, contact Interstate Plastics to review prelaminated FRP options.
Nudo® FiberLite FRP Embossed - Class C (#LP-F9) White Sheet Questions?
