Break Room Table Dividers
 MouseOver to Zoom.






You Might Also be Interested In

Sneeze Guard Cleaner and Disinfectant Kit | Guardsy®

Conveyor Guards

Urinal Dividers

Food Inspection Block

Face Shield

HOME > SNEEZE GUARDS AND SHIELDS

Break Room Table Dividers

Clear interlocking plastic dividers for break room tables and common areas


Get Your Online Pricing: Sanitizing Acrylic and Polycarbonate »
Tips for measuring & cut-to-size policy »

How To Measure and Cut-To-Size Policy [X]


Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Sanitizing Acrylic and Polycarbonate Sheet [X]


Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.

Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.

Compatible Polycarbonate Disinfectants:

• sBioMed Steriplex SD
• Safetec Surface Wipes
• Contec Healthcare Perodox RTU
• Contec Healthcare PS-911 EB Prostat Sterile Wipes

Compatible Acrylic Disinfectants:

• Pharmacy Grade Hydrogen Peroxide
• Household Bleach
• Isopropyl Alcohol (Water Diluted to 30% Strength)

[Download as a PDF]

  1/4" x 23.5" x 30" Main Divider for Round or Square Table | 1/4" x 23.5" x 30" Side Divider (1)
  1/4" x 23.5" x 47.5" Main Divider for Round or Square Table | 1/4" x 23.5" x 47.5" Side Divider (1)
  1/4" x 23.5" x 59" Main Divider for Round or Square Table | 1/4" x 23.5" x 59" Side Divider (1)
  1/4" x 23.5" x 71.5" Main Divider for Rectangular Table | 1/4" x 23.5" x 47.5" Side Dividers (2)
  1/4" x 23.5" x 95.5" Main Divider for Rectangular Table | 1/4" x 23.5" x 47.5" Side Dividers (3)

Save with our Volume Pricing:
QuantityPrice Each
10->19$199.5
20->49$189
50+$178.5
 

Total Price: $210.00



Overview Specs & Uses Reviews Inquiry
MSCEADIVIDERWSLT BREAK - Overview

American-made & ready to ship from one of our 10 nationwide locations.

Break room table dividers are designed to provide protection from airborne bacteria and divide tables evenly in office or factory break rooms and common areas. These interlocking plastic sheets can freely stand without additional equipment. Table dividers are made of clear plastics and facilitate safe and unimpeded face-to-face interactions over meals and conferences.

Table dividers are available as complete kits that consist of a main divider and one or more side dividers - the number of side dividers in each kit is based on the selected size of the main divider. Compared to similar glass products, they have greater impact resistance and are more durable. Sanitizing the table divider sheets is easy when using non-abrasive cleaners. See our recommendations for cleaning and disinfecting sneeze guards and similar products.

Looking for a size that's not listed? Custom sizes are available upon request. Call (888) 768-5759 for more information.



Features

More Information on Break Room Table Dividers & Food Processing Guards »

Sneeze Guard & Safety Barrier Information [PDF]

Sanitizing Acrylic, Polycarbonate, & PETG Sheets [PDF]

  • Physical barrier disrupts airborne bacteria
  • Clear plastic allows face-to-face interactions
  • Interlocking design - structurally stable without extra equipment
  • Rounded corners
  • Splits tables evenly
  • Kit includes 1 main divider and 1 or more side dividers
  • Excellent impact resistance
  • Made in the U.S.A.

Break Room Table Divider Diagrams

For Round or Square Tables (1 Side Divider)

For Rectangular Tables (2 Side Dividers)

For Rectangular Tables (3 Side Dividers)

RETURN POLICY: Personal protection equipment (PPE) and barriers (PPB) are non-returnable and non-refundable. PPE and PPB products include, but are not limited to, "sneeze guards", "protective barriers", "cashier panels", "office barriers", as well as "guards" and "shields". For items damaged during shipping, please make a claim with the shipping company within 7 days from receipt of the delivery date. Please give the claim number to an Interstate Plastics representative at (888) 768-5759 so that the issue can be further examined and the appropriate actions are taken. For more information, please read our full shipping and returns policy.



Material Warnings

 WARNING: This product can expose you to chemicals including Ethyl acrylate, CAS 140-88-5, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including Bisphenol A, CAS 80-05-7 , which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

WARNING: Sharp Edges! Handle with care.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.

Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.



Interstate Plastics Suppliers