Products Displayed: 92 |
Title
| Description | |
| ABS plastic is an easily machined, low cost, rigid thermoplastic plastic with high impact strength.
 |  |
|
| ABS plastic is an easily machined, low cost, rigid thermoplastic plastic with high impact strength.
|  |
|
| ABS plastic is an easily machined, low cost, rigid thermoplastic plastic with high impact strength.
|  |
|
| ABS flame retardant sheeting is UL-94 rated.
|  |
|
| ABS plastic is an easily machined, low cost, rigid thermoplastic plastic with high impact strength.
 |  |
|
| ABS plastic is an easily machined, low cost, rigid thermoplastic plastic with high impact strength.
|  |
|
| ABS plastic is an easily machined, low cost, rigid thermoplastic plastic with high impact strength.
|  |
|
| Acetal AF blend has excellent sliding/friction/wear properties.
|  |
|
| Acetal AF has excellent friction, wear specs. Acetal structure similar to Delrin grades Delrin AF.
 |  |
|
| Acetal is a tough, stable engineering thermoplastic.
|  |
|
| Black acetal & acetal material. Acetal plastic properties make it a tough engineering thermoplastic.
|  |
|
| Acetal homopolymer (Delrin) has more mechanical strength and stiffness than acetal copolymer. |  |
|
| Delrin plastic and delrin black (delrin sheet) bridge the gap between metals and plastic.
|  |
|
| Acetal copolymer. Good wear properties low friction acetal plastic sheet.
|  |
|
| Acetal homopolymer (Delrin) has more mechanical strength and stiffness than acetal copolymer. |  |
|
| Delrin vs Acetal - Delrin sheets and Delrin plastic offer an excellent balance of properties.
|  |
|
| ESD Acetal contains no carbon fibers or powders and is for clean room use.
|  |
|
| Acetal copolymer tubes have low moisture absorption and high strength, stiffness, and stability. |  |
|
| Acrylic AR1 is an acrylic sheet material with 45 times the abrasion resistance of uncoated acrylic.
|  |
|
| Dupont� Vespel® polyimide: a high temperature, creep resistant material.
|  |
|
| Dupont� Vespel® high-performance polyimide.
|  |
|
| NEMA GPO-3 Glass Polyester Laminate - Red. |  |
|
| All the beauty of authentic wood without the maintenance and upkeep. |  |
|
| Bundles of HIX Shrinkable Polyolefin Shrink Wrap Tubing in 4ft. lengths.
|  |
|
| Kydex is a thermoforming material with many colors, textures, and patterns.
|  |
|
| Kydex is a thermoforming material with many colors, textures, and patterns.
|  |
|
| Kydex is a thermoforming material with many colors, textures, and patterns.
|  |
|
| Nylon products are tough, with high strength, dimensional stability, & wear resistance. |  |
|
| Nylon 66 rod in MD grade is tough, dimensionally stable, wear resistant, and versatile.
|  |
|
| Nylon stock, nylon plate, and nylon products are tough, dimensionally stable & wear resistant.
|  |
|
| Nylon has a combination of toughness, dimensional stability, wear resistance, and versatility. |  |
|
| Tough, dimensionally stable extruded nylon bushing stock with good wear resistance and versatility. |  |
|
| Nylon Plastic Material Type Nylon 6 6 Sheet. Extrusion Grade Nylon 66 Sheet.
|  |
|
| Nylatron NSM is considered better than cast nylon rod and nylon rod stock for large part sizes.
|  |
|
| Torlon is the highest performing melt processable plastic. It has superior resistance to heat.
|  |
|
| Excellent wear resistance in bearing grades. Endures high heat, chemical and stress conditions.
|  |
|
| Excellent wear resistance in bearing grades. Endures high heat, chemical and stress conditions.
|  |
|
| Ultem offers high strength and excellent resistance to flame and heat.
|  |
|
| Ultem offers high strength and excellent resistance to flame and heat.
|  |
|
| Black PEEK rods suitable for PEEK machining and outdoor use.
 |  |
|
| Black PEEK sheets suitable for PEEK machining, PEEK bushings, and various applications. |  |
|
| PEEK is high heat resistant engineered thermoplastic with excellent chemical and fatigue resistance.
|  |
|
| PEEK is high heat resistant engineered thermoplastic with excellent chemical and fatigue resistance.
|  |
|
| Unfilled natural PEEK tube has very good resistance to chemicals, abrasion, and wear. |  |
|
| An internally lubricated thermoplastic polyester providing enhanced wear and inertness.
|  |
|
| Of the phenolic sheet grades, CE grade phenolic sheet is considered 'electrical' grade. |  |
|
| Similar composition to G-10. G-11 phenolic is used at higher temperatures that G-10 cannot handle. |  |
|
| G-7 grade phenolic sheet is unparalleled for arc resistant or high heat applications. |  |
|
| G-9 phenolic sheet has good mechanical properties & high resistance to flames & alkali solutions. |  |
|
| G10 FR4 rods suitable for structural, high humidity, and electrical insulation applications. |  |
|
| G-10 is suitable for a variety of structural, high humidity, and electrical insulation applications.
|  |
|
| Of the phenolic sheet grades, CE grade phenolic rod is considered 'electrical' grade. |  |
|
| "C" Grade Natural Canvas Phenolic Sheet
|  |
|
| LE phenolic rods have excellent electrical properties that regular linen phenolic rods do not. |  |
|
| Natural LE Phenolic Sheet.
|  |
|
| Natural Paper Phenolic Sheet - Economy
|  |
|
| Polycarbonate is a versatile, tough, durable plastic used for a variety of applications. |  |
|
| A very durable clear polycarbonate tube.
|  |
|
| Polycarbonate AR is an abrasion and enhanced UV-resistant sheet.
|  |
|
| Polycarbonate is a versatile, tough, durable plastic used for a variety of applications.
|  |
|
| High impact strength, dimensional stability, and the lowest internal stress and inclusion levels.
|  |
|
| Noryl is strong with outstanding strength, stiffness, mechanical, thermal, and electrical properties
|  |
|
| PPS & Techtron® PPS operate at high temperatures with low outgassing.
|  |
|
| PPS and Techtron® PPS operate at high temperatures with low outgassing.
|  |
|
| A rigid, high-strength, semi-tough thermoplastic that has a heat deflection temperature of 345�F.
|  |
|
| Polyurethane sheet combines the elasticity of rubber and the durability of metal. |  |
|
| Polyurethane sheet combines the elasticity of rubber and the durability of metal. |  |
|
| Polyurethane sheet combines the elasticity of rubber and the durability of metal. |  |
|
| Polyurethane sheet combines the elasticity of rubber and the durability of metal. |  |
|
| PVC is ideally suited for applications where maximum chemical resistance is necessary.
|  |
|
| Expanded PVC is tough, high-strength, & lightweight. Many sizes, thicknesses & colors available.
|  |
|
| Extruded PTFE tubes withstand high heat temperatures, corrosion, and harsh chemicals. |  |
|
| PTFE rods resist heat and chemicals. PTFE block is used for low friction applications.
|  |
|
| PTFE rod (polytetrafluoroethylene) for low friction applications. Compare to Teflon sheet and rod.
|  |
|
| PTFE sheeting and Teflon PTFE sheet are used in extremely low friction applications.
|  |
|
| PTFE sheet and PTFE Teflon sheet are low friction. PTFE sheets resist heat, chemicals, & corrosion.
|  |
|
| PTFE tubing has the lowest coefficient of friction of any plastic and allows build-up free flow.
|  |
|
| Self-lubricating engineered thermoplastic turcite kit.
|  |
|
| Turcite X is a self-lubricating engineered thermoplastic turcite material.
|  |
|
| Reprocessed UHMW is recommended for less demanding applications versus virgin.
|  |
|
| Virgin grade black UHMW rod stock has good wear, chemical, & impact resistances. |  |
|
| Black uhmw sheet, virgin grade, for general purpose use. |  |
|
| UHMW-PE anti-static can move products more safely in potentially volatile environments.
|  |
|
| Reprocessed UHMW is recommended for less demanding applications versus virgin. |  |
|
| Low friction virgin UHMW resists chemicals and impacts and extends part life. |  |
|
| Reprocessed UHMW is recommended for less demanding applications versus virgin. |  |
|
| Virgin UHMW is a relatively low cost abrasion, impact, and chemically resistant material. |  |
|
| Virgin UHMW is a relatively low cost abrasion, impact, and chemically resistant material.
|  |
|
| Virgin UHMW is a relatively low cost abrasion, impact, and chemically resistant material. |  |
|
| Low friction virgin UHMW resists chemicals and impacts and extends part life. |  |
|
| Virgin UHMW is a relatively low cost abrasion, impact, and chemically resistant material. |  |
|
| Low friction virgin UHMW resists chemicals and impacts and extends part life. |  |
|
