As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade.Please review our full return and shipping policy here.
Measure Twice, Cut Once
Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring Tape
Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End Hook
The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
Sanitizing Acrylic and Polycarbonate Sheet [X]
Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.
Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.
*** CUSTOM LENGTHS AVAILABLE. MAKE A COMMENT ON YOUR ORDER AS TO THE EXACT LENGTH YOU WISH TO RECEIVE. TOLERANCE IS +/-.125". ***
Dynaglas SolarSoft Max is a revolutionary breakthrough in the horticultural industry. Its Greca style corrugation allows excellent light transmittance at low sun angles while maintaining hemispherical light transmittance up to 78%. This corrugation combines with a unique proprietary formulation to create sheets that provide 90% light dispersion while maintaining 90% light transmission. The end result is deeper light penetration that is more evenly dispersed into plant canopies for more consistent growth.
DynaGlas SolarSoft Max's white color allows for maximum light transmission while eliminating shadows and reducing unwanted solar heat gain. As light transmits through the sheet, the SolarSoft special pigments diffuse the light so that it spreads in many directions. This allows for more evenly dispersed light throughout the greenhouse and less stress caused by direct sunlight, resulting in an ideal growth environment.
Corrugated profile and improved formula allows up to 6% more light into the greenhouse compared to other diffused and clear polycarbonate greenhouse coverings
Up to 90% light transmission
Up to 90% haze value
Virtually unbreakable
Flexible and easy to install
Wide service temperature range: from -40°F to +212°F (-40°C to +100°C)
Anti-condensate coating
Material Warnings
WARNING: This product can expose you to chemicals including Bisphenol A, CAS 80-05-7 , which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Handling: Cut sheets may have sharp edges. We recommend wearing protective gloves when unpacking and handling this material to ensure safety.
Suitability: We take pride in the quality of our materials as they leave our facility. However, because every project is unique, we cannot account for how materials are modified, stored, or used after delivery. Please perform the necessary tests to ensure this material is right for your specific application and end-use conditions.
DynaGlas SolarSoft Max provides a more pleasant work environment by diffusing light more efficiently, which reduces heat buildup in the greenhouse. At direct sunlight impact angles, this product shows similar light transmission to glass, and at low sunlight angles, it transmits almost 50% more light.
DynaGlas SolarSoft Max is typically used in:
Greenhouses
Dynaglas SolarSoft Max | Corrugated Polycarbonate Sheet Questions?
WARNING: This product can expose you to chemicals including Bisphenol A, CAS 80-05-7 , which are known to the State of California to cause birth defects or other reproductive harm. For more information go to