As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade.Please review our full return and shipping policy here.
Measure Twice, Cut Once
Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring Tape
Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End Hook
The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
Sanitizing Acrylic and Polycarbonate Sheet [X]
Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.
Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.
Static Dissipative Acetal for Precision-Machined Components
Natural ESD Acetal Sheet is a static dissipative engineering thermoplastic designed for applications where electrostatic charge buildup can affect sensitive electronics or equipment. This specialized polyoxymethylene copolymer (POM-C) combines controlled static dissipation with the machinability, dimensional stability, and low-friction characteristics associated with acetal.
Natural ESD acetal formulations typically offer surface resistivity in the 109 to 1011 ohms/square range, allowing accumulated static charge to dissipate in a controlled manner. This material uses antistatic additives, making it a candidate for cleanroom tooling, electronics handling, and moving components. Its mechanical properties also support precision-machined fixtures, guides, bushings, and other functional parts.
Don't need static control? For general-purpose mechanical components, consider Natural Acetal Copolymer. For applications prioritizing higher mechanical strength and stiffness without an ESD requirement, compare Natural Delrin® Homopolymer Sheet.
Why Choose Natural ESD Acetal Sheet?
This specialty grade is intended for applications that need both static control and functional mechanical performance. Key advantages include:
Controlled Static Dissipation:
Helps accumulated electrical charge dissipate more predictably than standard insulating acetal, reducing the risk of electrostatic discharge around sensitive components.
Antistatic Formulation:
Uses antistatic additives to provide static control for cleanroom tooling, electronics handling, and moving components.
Good Bearing and Wear Properties:
Combines relatively low friction with wear resistance for guides, bushings, and moving components that experience repeated sliding contact.
Precision Machinability:
Can be machined into custom fixtures, housings, and mechanical components using conventional plastic machining techniques.
Dimensional Stability:
Low moisture sensitivity and good structural stability help machined parts retain their intended fit under suitable operating conditions.
ESD Acetal vs. Standard Acetal: Which Do You Need?
Both materials belong to the acetal family, but their electrical behavior determines where each is typically recommended.
Choose Natural ESD Acetal (This Sheet) when machined components must dissipate static charge in electronics manufacturing, semiconductor handling, or automated equipment. Its antistatic formulation provides static-control properties not found in conventional insulating acetal.
Choose Standard Acetal Copolymer when static dissipation is unnecessary and the primary requirements are mechanical strength, rigidity, machinability, and cost. Unmodified acetal generally offers greater stiffness than comparable static-dissipative formulations.
Natural ESD acetal can be cut, drilled, milled, and turned using conventional plastic machining equipment. Its machinability makes it suitable for precision fixtures, equipment guides, and components with detailed geometries. Use sharp cutting tools, appropriate workholding, and controlled machining conditions to limit heat buildup and dimensional distortion. For ESD-sensitive applications, verify surface resistance and cleanliness after machining and cleaning, particularly when parts must meet defined handling or cleanroom requirements.
Related Materials & Technical Resources
Material Warnings
WARNING: This product can expose you to chemicals including Formaldehyde, CAS 50-00-0, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. WARNING: This product can expose you to chemicals including Hexachlorobenzene, CAS 118-74-1, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Handling: Cut sheets may have sharp edges. We recommend wearing protective gloves when unpacking and handling this material to ensure safety.
Suitability: We take pride in the quality of our materials as they leave our facility. However, because every project is unique, we cannot account for how materials are modified, stored, or used after delivery. Please perform the necessary tests to ensure this material is right for your specific application and end-use conditions.
ACENEE SH
Technical Performance
Natural ESD acetal combines the mechanical properties of acetal copolymer with an antistatic additive system designed to control electrostatic charge accumulation. It is typically recommended for machined parts that require static dissipation, good sliding characteristics, and dimensional stability. Exact performance depends on the manufacturer's formulation and operating conditions.
Static Dissipation:
Comparable natural ESD acetal grades have published surface resistivity values of 10? to 10¹¹ ohms/square. This allows electrical charge to dissipate gradually rather than remaining concentrated on an insulating surface, helping reduce ESD-related risks during handling or movement.
Bearing and Sliding Performance:
Low-friction characteristics and good wear resistance make this material suitable for guides, bushings, and moving parts. It can help reduce drag and wear in sliding-contact applications where static buildup is also a concern.
Mechanical and Dimensional Behavior:
Acetal's machinability and relatively low moisture absorption support parts requiring consistent dimensions and repeatable movement. However, antistatic additives can reduce stiffness or strength compared with unmodified acetal, making load evaluation important.
Key Properties
Antistatic Additives:
Provides static-control characteristics for cleanroom tooling, electronics handling, and moving components.
Machinability:
Supports machining of detailed fixtures, guides, bushings, and equipment components using established plastic fabrication techniques.
Chemical Resistance:
Offers resistance to many common oils, fuels, and industrial solvents. Compatibility should be checked against specific chemicals, concentrations, temperatures, and exposure durations.
Temperature Performance:
Provides useful thermal stability within the manufacturer's recommended service range. Continuous operating limits and mechanical performance at elevated temperatures depend on the specific ESD formulation and applied load.
Common Industrial Applications
Electronics Manufacturing: Assembly fixtures, component guides, and handling surfaces designed to reduce static accumulation around sensitive electronic parts.
Semiconductor Handling: Machined fixtures, positioning components, and equipment parts used in controlled manufacturing areas where static management is important.
Automation and Conveying: Bushings, rollers, guides, and wear components exposed to repeated sliding or frictional contact that may generate electrostatic charge.
Inspection and Production Tooling: Jigs, nests, locating fixtures, and machine components requiring a combination of machinability, dimensional stability, and static-dissipative behavior.
Engineering Limitations & Alternatives
Natural ESD acetal is designed to balance static dissipation and mechanical performance. Applications requiring electrical conductivity, close dimensional control during water exposure, or greater structural stiffness may need another material grade.
Water Exposure: ESD acetal grades can absorb more water than standard acetal copolymer. Better Alternative: For closely fitted parts exposed to water where static control is unnecessary, consider Natural Acetal Copolymer.
Structural Loads and Operating Conditions: Antistatic additives may reduce mechanical properties relative to standard acetal. Elevated temperatures, sustained loads, and exposure to strong acids or alkalis also require additional material evaluation. Better Alternative: When higher stiffness is the priority and static control is unnecessary, consider Natural Delrin® Homopolymer.