Nylon 66 Tube | Bushing Stock
 MouseOver to Zoom.






You Might Also be Interested In

Interstate Advanced Materials Membership

Nylon Rod | Natural Extruded

Nylon Plastic Material | Nylon 6 6 Extruded Sheet

Nylon Plastic Rod | Natural Cast

Nylon Tubes | Natural Cast Tubular Bar

HOME > NYLON

Nylon 66 Tube | Bushing Stock

Extruded Nylon Bushing Stock



Get Your Online Pricing: Tips for measuring »

How To Measure and Cut-To-Size Policy [X]


Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Note: The minimum order amount for this product is $250. Orders less than this amount will be refunded.
 

Total Price: $10.17

 
As low as $0.94/month with

Overview Specs & Uses Reviews Inquiry
NYLNE BU - Overview

Nylon is a tough, stable engineering thermoplastic with a high modulus of elasticity, high strength, good rigidity, dimensional stability, resistance to moisture, solvents, and other chemicals. It performs significantly better than copolymers in toughness at extreme temperatures, fatigue endurance, and elongation at yield. Extruded nylon's low coefficient of friction lessens or removes the need for external lubricants and can extend the service life and reduce the wear of mating parts.

Nylon bushing stock has tighter tolerances compared to similar hollow rod products and its surface finish does not require grinding or machining before it can be used. Common applications for nylon bushing stock include bushings, bearings, gears, rollers, valve seats, and other custom parts.



Features

[PDF Spec Sheet]

  • Tighter tolerances compared to similar hollow rod products
  • Surface finish allows bushing stock to be used without surface grind or machine
  • Low coefficient of friction
  • High modulus of elasticity
  • High strength
  • High rigidity and dimensional stability
  • Resists chemicals and moisture

NEED A NYLON SAMPLE?
Thermoplastics Material Sample Pack
Friction Resistance Material Sample Pack
Tensile Strength Material Sample Pack



Material Warnings

Material Warning WARNING: This product can expose you to chemicals including N,N-Dimethylformamide, CAS 68-12-2, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including METHYLPYRROLIDONE, CAS 872-50-4, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

WARNING: SHARP EDGES. Handle with care.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.

Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.



Interstate Plastics Suppliers