Products Displayed: 33 |
Title
| Description | |
| Machined two bolt flange UHMW bearings. |  |
|
| Machined four bolt flange UHMW bearings. |  |
|
| UHMW solid pillow block bearings are low friction and corrosion resistant. |  |
|
| Heavy duty UHMW roll end bearings excel in corrosion-sensitive applications. |  |
|
| Heavy duty UHMW roll end bearings excel in corrosion-sensitive applications. | |
|
| Standard duty UHMW roll end bearings excel in corrosion-sensitive applications. | |
|
| UHMW split pillow block bearings are self-aligning and resistant to corrosion. |  |
|
| UHMW split pillow block bearings are self-aligning and resistant to corrosion. | |
|
| Solid pillow block bearings made from oil-filled nylon are durable and wear resistant. | |
|
| Medium duty oil-filled and low friction machined split pillow block bearings made from nylon. | |
|
| A cylindrical bushing with MD-filled Nylon, available in a variety of sizes. |  |
|
| Wear resistant flange bushings made from food grade nylon. FDA Approved. |  |
|
| A cylindrical bushing with MD filled Nylon, available in a variety of sizes. |  |
|
| Natural UHMW split static shaft bushings. |  |
|
| Four bolt flange bearings made from oil-filled nylon have great load bearing capability. |  |
|
| Two bolt flange bearings made from oil-filled nylon have great load bearing capability. | |
|
| Flange Bushings - High Temperature, Spec Polymer. | |
|
| Molded four bolt flange bearings with an oil-filled UHMW insert, FDA/USA approved. |  |
|
| UHMW roll end bearing inserts excel in corrosion-sensitive applications. |  |
|
| Low friction, wear resistant oil-filled nylon bearing insert. |  |
|
| Nylon thrust washers are wear resistant and extend part life. |  |
|
| Nylon split static shaft bushings have good wear resistance. | |
|
| Molded solid pillow block bearings made from UHMW, FDA approved. |  |
|
| Delrin/acetal shaft collars have low friction and high mechanical strength, rigidity, and stability. |  |
|
| Nylon shaft collars offer decreased wear and the ability to operate in high heat conditions. |  |
|
| Sleeve Bushing - High Temperature, Cylindrical, Spec Polymer. Multiple materials available. |  |
|
| Nylon split collars have low friction properties and can withstand harsh chemicals and high heat. |  |
|
| Molded two bolt flange bearings with an oil-filled UHMW insert. |  |
|
| Molded UHMW roll end bearings. |  |
|
| UHMW Flange Bearing Inserts (Standard Duty) |  |
|
| Shaft collars made from reprocessed UHMW are used in less demanding applications than virgin. |  |
|
| Split wall bearings made from natural UHMW or oil-filled food grade nylon with a 5" max bore. |  |
|
| Natural UHMW wall bearings have low coefficient of friction. | |
|
