Providing Solutions in Plastics Interstate Plastics

  
(888) 768-5759

Plastic experts are
available to assist you:
8AM-5PM PST Mon-Fri
 
Get A Quote
Buy More,
Save More!
LOG IN >>
TOTAL: $0 (0 Item)

PFA-M (FM4910) HIGH SERVICE TEMPERATURE SHEET
 MouseOver to Zoom.


HOME > PVDF

PFA-M (FM4910) HIGH SERVICE TEMPERATURE SHEET

The ultimate choice for high service temperature, flame retardant plastic sheet.



 4 stars based on 1 Review(s)
Get Your Online Pricing: Tips for measuring & cut-to-size policy »
How To Measure and Cut-To-Size Policy | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

PFA-M Sheet .125" x 48" x 96"$3,658.95
PFA-M Sheet .25" x 48" x 96"$7,315.95
PFA-M Sheet .375" x 48" x 96"$10,838.00
PFA-M Sheet .5" x 48" x 96"$14,600.00
 

Total Price: $3,658.95

 

Overview Specs & Uses Reviews Inquiry
PFANEL SH - Overview

PFA-M (FM4910) high service temperature sheet is a copolymer plastic sheet made from tetrafluoroethylene and perfluorinated methyl vinyl ether, which offers high flexural resistance. PFA-M plastic is used in a wide range of applications in the chemical process industry. Its maximum service temperature is 425F, and its high gloss surface repels contaminants more effectively than molded PFA products. Its purity exceeds that of PVDF.


With excellent stress crack resistance and an extremely smooth surface, PFA-M (FM4910) high service temperature sheet ensures reduced caking of solids, efficient cleaning, and the lowest possible pressure decrease.



Features

  • Excellent stress crack resistance

  • Extremely smooth surface

  • Reduces caking of solids

  • Easy to clean

  • Maximum service temperature of 425F




Resources
About Us
Privacy Policy
Terms & Conditions
Shipping & Returns
website uptime
Need Help?
Contact Us
FAQ
Advanced Search
Sitemap
Career

Contact Information
Phone: (888) 768-5759
330 Commerce Circle
Sacramento, CA 95815
aaron.j@interstateplastics.com
TIPS, TRICKS & DISCOUNTS FROM OUR PLASTICS EXPERTS!