PVC CRP-1 | FM4910 PVC Welding Rod
 MouseOver to Zoom.

You Might Also be Interested In

Interstate Advanced Materials Membership

PVC CRP-1 | FM4910 PVC Sheet

LAM 2000® | CPVC (FM4910) Clear/Blue Sheet

PVDF Kynar® 740 (FM4910) Sheet

PFA - M® (FM4910) High Service Temperature Sheet


PVC CRP-1 | FM4910 PVC Welding Rod

Simona CRP-1 FM4910 rated PVC coiled welding rod

Get Your Online Pricing: Tips for measuring »

How To Measure and Cut-To-Size Policy [X]

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

.156" dia. CRP-1 Type 1 PVC Welding Rod - Coiled - 5 Pounds

Total Price: $141.75

As low as $13/month with

Overview Specs & Uses Reviews Inquiry
PVCWCF RW - Overview

CRP-1 flame retardant welding rod is an FM4910 and UL94 V-0 rated high performance material based on a PVC formula. Impact modified CRP-1 plastic features increased durability against impact forces and resists temperatures much higher than that of standard PVC grades. CRP-1 is more easily welded than PVC-C: in comparative welding trials, CRP-1 welds quicker and with more ease versus PVC-C and other FM4910 listed PVC grades.

CRP-1 welding rod is available in 5 lb. increments.

In general, PVC CRP-1 sees use in the following applications:

  • Semiconductor processing equipment
  • Clean room enclosures and cabinetry
  • Industrial process rinse, water recycling systems, and water transfer interfaces
  • Dry tool enclosures
  • Wet bench applications
  • Electrical cabinets

  • Available in 5 lb. increments
  • FM4910 and UL94 V-0 compliant
  • Impact modified for high durability
  • PVDF weldable (with JSR hybrid welding rod)
  • High resistance to alkalis and acids
  • Works well in contact with ultra-pure water systems in wet bench applications

Material Warnings

Material Warning  WARNING: This product can expose you to chemicals including Polyvinyl Chloride, CAS 9002-86, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

WARNING: SHARP EDGES. Handle with care.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.

Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.

Interstate Plastics Suppliers