Techtron<sup>®</sup> HPV PPS | Bearing Grade PPS
 MouseOver to Zoom.






You Might Also be Interested In

PPS SHEET | NATURAL

HOME > PPS - POLYPHENYLENE SULFIDE

Techtron® HPV PPS | Bearing Grade PPS

Bearing Grade HPV PolyPhenylene Sulfide Sheet


Get Your Online Pricing: Sanitizing Acrylic and Polycarbonate »
Tips for measuring & cut-to-size policy »

How To Measure and Cut-To-Size Policy [X]


Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Sanitizing Acrylic and Polycarbonate Sheet [X]


Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.

Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.

Compatible Polycarbonate Disinfectants:

• sBioMed Steriplex SD
• Safetec Surface Wipes
• Contec Healthcare Perodox RTU
• Contec Healthcare PS-911 EB Prostat Sterile Wipes

Compatible Acrylic Disinfectants:

• Pharmacy Grade Hydrogen Peroxide
• Household Bleach
• Isopropyl Alcohol (Water Diluted to 30% Strength)

[Download as a PDF]

  .47" x 24.61" x 39.5" Techtron® HPV PPS Plate
  1" x 24.61" x 39.5" Techtron® HPV PPS Plate

 

Total Price: $3,646.24


As low as $0.28/month with

Overview Specs & Uses Reviews Inquiry
PPSNEH SH - Overview

Techtron® HPV PPS is a semi-crystalline material with outstanding chemical resistance. Compared to other advanced engineering plastics such as PEEK or PAI, Techtron® HPV PPS resists an even wider amount of chemicals and has no known solvents below 392°F. It is unaffected by strong bases, fuels, and acids. It remains dimensionally stable even at high temperatures or when exposed to moisture. Techtron® HPV PPS sheets are flame retardant with a UL94 flammability rating of V-0.

Unlike virgin PPS, Techtron® HPV PPS has a low coefficient of friction that enhances its wear properties and extends part life while avoiding premature wear of the counter face that glass fiber reinforced PPS can cause. Its impressive mechanical strength, wear properties, and stiffness combined with its cost-effectiveness makes it an attractive option for applications where thermoplastic materials fall short and high-end advanced engineering plastics are too cost-prohibitive.



Features
  • Great dimensional stability
  • Low coefficient of friction - excellent wear properties
  • Outstanding resistance to chemicals, hydrolysis
  • Electrical insulating properties
  • Can be machined to tight tolerances
  • Flame retardant - UL94 V-0 flammability rating
  • Resists high energy radiation


WARNING: Sharp Edges! Handle with care.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.

Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.



Interstate Plastics Suppliers