As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade.Please review our full return and shipping policy here.
Measure Twice, Cut Once
Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring Tape
Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End Hook
The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
Sanitizing Acrylic and Polycarbonate Sheet [X]
Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.
Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.
Tivar® DrySlide: The Anti-Static Solution for High-Speed Conveying
Tivar® DrySlide is a specialized, lubricant-filled UHMW-PE sheet designed to tackle the most demanding friction and static challenges in material handling. By directly integrating a proprietary dry lubricant into the polymer matrix, this material delivers a lower coefficient of friction than standard UHMW, helping packages slide more freely without the use of external chute lubes, oils, or waxes.
Beyond its slick surface, Tivar® DrySlide is an Electrostatic Dissipative (ESD) material. It actively bleeds off static charges, making it a preferred choice for dusty or humid environments where static build-up can cause product jams or flow disruptions and dust attraction.
Need standard FDA-compliant material? For food-contact applications that do not require ESD properties, see our Natural Virgin UHMW.
Why Choose Tivar® DrySlide?
DrySlide is specifically made for environments where surface marring and static cling are unacceptable. It is the premium choice if you need:
Electrostatic Dissipative (ESD):
With a surface resistivity of =< 109 ohm, it helps reduce static build-up that can contribute to sticking, dust attraction, and product-flow interruptions.
Non-Marring Surface:
Will not smudge or leave unsightly marks on shrink-wrapped products or cardboard packaging.
Superior Sliding Performance:
Modified built-in lubricant allows even damp or high-cling packages to move freely without sticking.
UV-Stabilized for Outdoor Durability:
UV-stabilized for outdoor use in railcars, truck beds, and exposed conveyor lines.
Reduced Maintenance:
Self-lubricating surface eliminates the cost and contamination risk of external sprays.
Tivar® DrySlide vs. Tivar® 88
While both are premium UHMW grades for flow applications, they are engineered for different material-handling challenges.
Choose Tivar® DrySlide (This Sheet) for Parcel & Package Handling. It is optimized for lower-weight items where electrostatic discharge (ESD) and non-marring surfaces are critical to prevent "box-burn" and product-flow interruptions.
Choose Tivar® 88 for Bulk Material Handling. This grade is engineered for the reliable flow of bulk solids in hoppers, chutes, bunkers, and transport containers, where preventing arching, ratholing, and erratic flow is the primary concern.
Fabrication & Machining
Tivar® DrySlide can be machined using standard tools suitable for UHMW materials. Like all UHMW, it has a high rate of thermal expansion; for precision components, allow for clearance to prevent binding in fluctuating temperatures.
Watch: What is Tivar® DrySlide?
Material Warnings
WARNING: This product can expose you to chemicals including Carbon Black, CAS 1333-86-4, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Handling: Cut sheets may have sharp edges. We recommend wearing protective gloves when unpacking and handling this material to ensure safety.
Suitability: We take pride in the quality of our materials as they leave our facility. However, because every project is unique, we cannot account for how materials are modified, stored, or used after delivery. Please perform the necessary tests to ensure this material is right for your specific application and end-use conditions.
UHMSV SH
Technical Performance
Tivar® DrySlide is a black, specialized UHMW-PE modified with an integrated dry lubricant and anti-static additives. It is engineered to reduce surface friction and static cling, even in environments with high humidity or fine particulate matter.
Bleeds off static charges, helping reduce sticking, dust attraction, and static-related flow interruptions in conveying environments.
Low Coefficient of Friction:
Offers a lower COF than standard UHMW, allowing damp or shrink-wrapped items to slide without sticking.
UV Stabilization:
Modified to resist degradation from ultraviolet light, making it suitable for outdoor use in railcars and off-road truck beds.
Key Properties
Non-Marring Surface:
Specially formulated to prevent smudging or marking on cardboard, paper, or plastic packaging.
Self-Lubricating:
Solid lubricants are built into the polymer matrix, meaning they will not leak, dry out, or require reapplication.
Moisture Impermeable:
Zero moisture absorption allows for consistent performance in high-humidity or wet environments without swelling.
Corrosion & Chemical Resistance:
Resistant to most corrosive chemicals, salts, and acids found in heavy industrial and cement applications.
Enhanced Wear & Abrasion Resistance:
Designed for demanding conveying applications, with enhanced wear and abrasion resistance and a lower coefficient of friction than standard UHMW grades.
Common Industrial Applications
Parcel & Material Handling: Chute liners, conveyor skirting, and slider beds that prevent package jams and "bridging."
Bulk Solid Processing: Bunker and hopper liners for grain, cement, and coal to ensure consistent material flow.
Heavy Transportation: Liners for railcars and off-road truck beds that allow for faster, cleaner unloading of abrasive materials.
Conveyor Components: Belt scrapers, chain guides, and wear strips that help materials move freely through conveying systems.
Engineering Limitations & Alternatives
Tivar® DrySlide is the premier solution for sliding friction, but it remains a UHMW-based material with specific mechanical limits:
Thermal Ceiling: Like standard UHMW, it should not be used in continuous service environments exceeding 180°F. Better Alternative: For high-heat sliding applications, consider PTFE (Teflon®).
Load-Bearing Creep: It is susceptible to "cold flow" under extreme static loads and is not intended for structural supports. Better Alternative: For high-load anti-static bushings, consider Cast Nylon.
Food Contact: Tivar® DrySlide contains additives that are generally not FDA-compliant for direct food contact. Better Alternative: For food-safe low-friction needs, choose Natural Virgin UHMW.
WARNING: This product can expose you to chemicals including Carbon Black, CAS 1333-86-4, which are known to the State of California to cause cancer. For more information go to