Products Displayed: 58 |
Title
| Description | |
| Tough, dimensionally stable extruded nylon bushing stock with good wear resistance and versatility. |  |
|
| Wear resistant flange bushings made from food grade nylon. FDA Approved.
 |  |
|
| A cylindrical bushing with MD-filled Nylon, available in a variety of sizes.
 |  |
|
| A cylindrical bushing with MD filled Nylon, available in a variety of sizes.
|  |
|
| Nylon split static shaft bushings have good wear resistance.
|  |
|
| Sleeve Bushing - High Temperature, Cylindrical, Spec Polymer. Multiple materials available.
|  |
|
| Flange Bushings - High Temperature, Spec Polymer.
| |
|
| Natural UHMW split static shaft bushings.
| |
|
| Nylon has a combination of toughness, dimensional stability, wear resistance, and versatility. |  |
|
| Hydlar Z nylon PA66 rod is an abrasion resistant plastic with great wear properties. |  |
|
| Hydlar Z nylon PA66 sheets are abrasion resistant plastic sheets with great wear properties. |  |
|
| Cast nylon XHA is heat stabilized for use in higher temperature applications than standard nylon. |  |
|
| Cast nylon XHA is better suited for higher temperature applications than unmodified cast nylon. |  |
|
| Wear resistance and load bearing capacity at extreme temperatures. | |
|
| Bearing grade PEEK sheet with the lowest coefficient of friction (COF) of all PEEK grades. |  |
|
| PTFE rod (polytetrafluoroethylene) for low friction applications. Compare to Teflon sheet and rod.
|  |
|
| Low friction virgin UHMW resists chemicals and impacts and extends part life. |  |
|
| IPX 2000 is an advanced, engineered polyethylene that has greater benefits than standard UHMW.
|  |
|
| Virgin UHMW is a relatively low cost abrasion, impact, and chemically resistant material.
|  |
|
| Virgin UHMW is a relatively low cost abrasion, impact, and chemically resistant material.
 |  |
|
| Acetal AF blend has excellent sliding/friction/wear properties.
|  |
|
| Acetal AF has excellent friction, wear specs. Acetal structure similar to Delrin grades Delrin AF.
|  |
|
| Acetal homopolymer (Delrin) has more mechanical strength and stiffness than acetal copolymer. |  |
|
| Acetal homopolymer (Delrin) has more mechanical strength and stiffness than acetal copolymer. |  |
|
| ESD Acetal contains no carbon fibers or powders and is for clean room use.
|  |
|
| Self-lubricating cast nylon tube with improved dimensional stability over standard cast nylon. |  |
|
| Flame, Smoke, Toxicity (FST) Retardant nylon for aircraft interior applications |  |
|
| Red self-lubricating cast nylon rod with good wear resistance and light weight. |  |
|
| Nylon MD has a low coefficient of friction, good wear resistance, toughness, & light weight. |  |
|
| Black PEEK rods suitable for PEEK machining and outdoor use.
 |  |
|
| Black PEEK sheets suitable for PEEK machining, PEEK bushings, and various applications. |  |
|
| Of the phenolic sheet grades, CE grade phenolic sheet is considered 'electrical' grade. |  |
|
| Of the phenolic sheet grades, CE grade phenolic rod is considered 'electrical' grade. |  |
|
| LE phenolic rods have excellent electrical properties that regular linen phenolic rods do not. |  |
|
| Techtron HPV PPS has outstanding chemical resistance, great wear resistance, and is flame retardant. |  |
|
| Extruded PTFE tubes withstand high heat temperatures, corrosion, and harsh chemicals. |  |
|
| PTFE sheeting and Teflon PTFE sheet are used in extremely low friction applications.
|  |
|
| PTFE sheet and PTFE Teflon sheet are low friction. PTFE sheets resist heat, chemicals, & corrosion.
|  |
|
| Self-lubricating engineered thermoplastic turcite kit.
|  |
|
| Turcite X is a self-lubricating engineered thermoplastic turcite material.
|  |
|
| Reprocessed UHMW is recommended for less demanding applications versus virgin.
|  |
|
| Reprocessed UHMW is recommended for less demanding applications versus virgin.
|  |
|
| Virgin grade black UHMW rod stock has good wear, chemical, & impact resistances. |  |
|
| Black uhmw sheet, virgin grade, for general purpose use. |  |
|
| UHMW-PE anti-static can move products more safely in potentially volatile environments.
|  |
|
| Reprocessed UHMW is recommended for less demanding applications versus virgin. |  |
|
| Reprocessed UHMW is recommended for less demanding applications versus virgin. |  |
|
| Virgin UHMW is a relatively low cost abrasion, impact, and chemically resistant material. |  |
|
| UHMW is a relatively low cost abrasion, impact, and chemically resistant material.
|  |
|
| Reprocessed UHMW features the benefits of virgin UHMW at a more cost-effective price. |  |
|
| Virgin grade red UHMW rod stock has good wear, chemical, & impact resistances. |  |
|
| Reprocessed UHMW features the benefits of virgin UHMW at a more cost-effective price. |  |
|
| Virgin UHMW is a relatively low cost abrasion, impact, and chemically resistant material. |  |
|
| Low friction virgin UHMW resists chemicals and impacts and extends part life. |  |
|
| Virgin blue colored UHMW rods safe for use in food contact applications. |  |
|
| Reprocessed UHMW features the benefits of virgin UHMW at a more cost-effective price. |  |
|
| Virgin UHMW is a relatively low cost abrasion, impact, and chemically resistant material. |  |
|
| Low friction virgin UHMW resists chemicals and impacts and extends part life. |  |
|
