100 results displayed - Please filter results using the menu above or the search bar. |
Title
| Description | |
| Aerosol blocking shields protect doctors from patient airways & allow safe access for intubation. |  |
|
| The food inspection block allows access & inspection of products with minimal risk of contamination. |  |
|
| Acetal AF blend has excellent sliding/friction/wear properties.
 |  |
|
| Acetal AF has excellent friction, wear specs. Acetal structure similar to Delrin grades Delrin AF.
 |  |
|
| Delrin 100 AF contains PTFE fibers to optimize Delrin's sliding friction properties. |  |
|
| Delrin 100 AF contains PTFE fibers to optimize Delrin's sliding friction properties. |  |
|
| Acetal is a tough, stable engineering thermoplastic.
|  |
|
| Black acetal & acetal material. Acetal plastic properties make it a tough engineering thermoplastic.
 |  |
|
| Acetal tubular bars have low moisture absorption and high strength, stiffness, and stability. |  |
|
| Delrin 527UV rods are UV stabilized for enhanced protection against ultraviolet rays. |  |
|
| Delrin 527UV rods are UV stabilized for enhanced protection against ultraviolet rays. |  |
|
| Acetal homopolymer (Delrin) has more mechanical strength and stiffness than acetal copolymer. |  |
|
| Delrin plastic and delrin black (delrin sheet) bridge the gap between metals and plastic.
|  |
|
| Orange acetal & acetal material. Acetal plastic properties make it a tough engineering thermoplastic |  |
|
| Acetal rod is a tough, stable engineering thermoplastic. Also consider delrin plastic tube.
|  |
|
| Acetal copolymer. Good wear properties low friction acetal plastic sheet.
|  |
|
| Acetal homopolymer (Delrin) has more mechanical strength and stiffness than acetal copolymer. |  |
|
| Delrin vs Acetal - Delrin sheets and Delrin plastic offer an excellent balance of properties.
|  |
|
| 20% glass filled Delrin 570 has low warpage and high stiffness. Intended for general industrial use. |  |
|
| ESD Acetal contains no carbon fibers or powders and is for clean room use.
|  |
|
| 20% glass filled Delrin 570 has low warpage and high stiffness. Intended for general industrial use. |  |
|
| Acetal copolymer tubes have low moisture absorption and high strength, stiffness, and stability. |  |
|
| Red acetal & acetal material. Acetal plastic properties make it a tough engineering thermoplastic. |  |
|
| Blue acetal rods are FDA compliant and a cost-effective solution for food processing applications. |  |
|
| Blue acetal sheets are FDA compliant and a cost-effective solution for food processing applications. |  |
|
| Blue metal detectable acetal copolymer for use in food environments. |  |
|
| Ultra detectable acetal copolymer rod designed for food contact applications. |  |
|
| Ultra detectable acetal copolymer plate designed for food contact applications. |  |
|
| A custom long double divider slide block. |  |
|
| A custom short double divider slide block. |  |
|
| A custom machined wedge part made out of black acetal. |  |
|
| A 5 piece self-assembled aerosol blocking shield to allow safe access during patient intubation. |  |
|
| A UHMW H.O.T. bearing block. |  |
|
| A UHMW H.O.T. bearing block. |  |
|
| A custom UHMW H.O.T. bearing block perch/squeeze. |  |
|
| A custom UHMW H.O.T. slide block cage. |  |
|
| A long custom UHMW H.O.T. divider slide block. |  |
|
| A custom natural UHMW slide block cage. |  |
|
| A custom bearing block made from UHMW H.O.T. |  |
|
| A custom UHMW. H.O.T. latching bar bearing block. |  |
|
| A custom UHMW H.O.T. handle bearing block. |  |
|
| A custom UHMW H.O.T. squeeze slide block. |  |
|
| Ultem Semitron ESD 420 is known for its inherent electrostatic dissipative properties. |  |
|
| Molded solid pillow block bearings made from UHMW, FDA approved.
|  |
|
| Medium duty oil-filled and low friction machined split pillow block bearings made from nylon.
|  |
|
| Solid pillow block bearings made from oil-filled nylon are durable and wear resistant.
|  |
|
| Delrin/acetal shaft collars have low friction and high mechanical strength, rigidity, and stability.
|  |
|
| UHMW split pillow block bearings are self-aligning and resistant to corrosion.
| |
|
| UHMW split pillow block bearings are self-aligning and resistant to corrosion.
| |
|
| UHMW solid pillow block bearings are low friction and corrosion resistant.
| |
|
| Molded spur gears made from acetal. Meets AGMA standards and is food contact safe.
|  |
|
| Acetal roller chains for close-tolerance applications.
|  |
|
| Onsrud router bits specifically designed to route high performance plastics like PEEK & Delrin. |  |
|
| Onsrud 63-600 series high speed router bits for machining aluminum sheet and block material. |  |
|
| Includes a 6x6" sample of Acetal, Nylon, UHMW, a 4x4" sample of Tivar HPV and a 3x3" sample of PT.
|  |
|
| 6x6" sample of ABS, Acetal, Acrylic, HDPE, PVC, UHMW, and 3x3" sample of PTFE.
|  |
|
| Includes a 6x6" sample of Acetal, Nylon, and ABS Machine Grade.
|  |
|
| 6x6" sample of ABS, Acetal, Acrylic, Nylon, PVC, UHMW, and a 3x3" sample of PTFE.
|  |
|
| Clear plastic sneeze guard cubicle partition extensions for cubicle walls and similar dividers. |  |
|
| Carbide-tipped saw blades ideal for cutting brittle plastic.
|  |
|
| Internally lubricated with enhanced wear and resistance properties versus nylon and acetal.
|  |
|
| Internally lubricated with enhanced wear and resistance properties versus nylon and acetal. |  |
|
| Molded four bolt flange bearings with an oil-filled UHMW insert, FDA/USA approved.
|  |
|
| Molded two bolt flange bearings with an oil-filled UHMW insert.
|  |
|
| Aluminum vent tape for polycarbonate multi-wall applications.
|  |
|
| Medical grade Noryl is an excellent material for medical devices.
|  |
|
| PET featuring excellent dimensional stability and superior wear, chemical and abrasion resistances. |  |
|
| Case of 24 silicone cartridges for general purpose sealing and bonding. |  |
|
| Case of 24 silicone cartridges for general purpose sealing and bonding.
|  |
|
| Self-lubricating engineered thermoplastic turcite kit.
|  |
|
| Turcite X is a self-lubricating engineered thermoplastic turcite material.
|  |
|
| Reprocessed UHMW is recommended for less demanding applications versus virgin.
|  |
|
| Reprocessed UHMW is recommended for less demanding applications versus virgin.
|  |
|
| Reprocessed UHMW is recommended for less demanding applications versus virgin. |  |
|
| Low friction virgin UHMW resists chemicals and impacts and extends part life. |  |
|
| IPX 2000 is an advanced, engineered polyethylene that has greater benefits than standard UHMW.
|  |
|
| Reprocessed UHMW is recommended for less demanding applications versus virgin. |  |
|
| Virgin UHMW is a relatively low cost abrasion, impact, and chemically resistant material.
|  |
|
| Virgin UHMW is a relatively low cost abrasion, impact, and chemically resistant material.
|  |
|
| Reprocessed UHMW features the benefits of virgin UHMW at a more cost-effective price. |  |
|
| Reprocessed UHMW features the benefits of virgin UHMW at a more cost-effective price. |  |
|
| Reprocessed UHMW features the benefits of virgin UHMW at a more cost-effective price. |  |
|
| 3D Printing Flexible Filament, Primalloy?, 0.5kg (500g) Reel, White
|  |
|
| Onsrud 52-700 series router bits designed to cut soft plastic with a smooth finish. |  |
|
| Onsrud 61-000P series router bits designed for use with plastics.
|  |
|
| Onsrud 70-500 Series HSS High Speed Steel Two Flute Fractional Drill Bits for Plastic.
|  |
|
| G-9 grade phenolic has good mechanical properties & high resistance to heat & alkali solutions. |  |
|
| G-9 phenolic sheet has good mechanical properties & high resistance to flames & alkali solutions. |  |
|
| Black PET rods available in various sizes and lengths. |  |
|
| Natural PET rods available in various sizes and lengths. |  |
|
| High performance glazing panels for punishing exterior applications - 3" trapezoidal corrugation. |  |
|
| High performance glazing panels for punishing exterior applications - 3" trapezoidal corrugation. |  |
|
| SunSky corrugated polycarbonate rooflite and sidelite panels turn night into brilliant daylight. |  |
|
| SunSky corrugated polycarbonate rooflite and sidelite panels turn night into brilliant daylight. |  |
|
| High performance glazing panels for punishing exterior applications - 3" trapezoidal corrugation. |  |
|
| High performance glazing panels for punishing exterior applications - 3" trapezoidal corrugation. |  |
|
| Rigid and lightweight corrugated polycarbonate panels for greenhouses and outdoor applications. |  |
|
| SunSky corrugated polycarbonate rooflite and sidelite panels turn night into brilliant daylight.
|  |
|
| High performance glazing panels for punishing exterior applications - 3" trapezoidal corrugation.
|  |
|
| High performance glazing panels for punishing exterior applications - 3" trapezoidal corrugation. |  |
|
