Products Displayed: 37 |
Title
| Description | |
| Delrin 527UV rods are UV stabilized for enhanced protection against ultraviolet rays. |  |
|
| Shop Black Delrin® 150 sheet at Interstate Plastics. This rigid acetal homopolymer offers excellent machinability, low friction, and high strength. |  |
|
| Shop Natural Delrin® 150 sheet cut-to-size. Good dimensional stability & wear resistance. Precision machinable POM-H for high-load applications. |  |
|
| Delrin 100 AF contains PTFE fibers to optimize Delrin's sliding friction properties. |  |
|
| 20% glass filled Delrin 570 has low warpage and high stiffness. Intended for general industrial use. |  |
|
| Acetal homopolymer (Delrin) has more mechanical strength and stiffness than acetal copolymer. |  |
|
| Acetal homopolymer (Delrin) has more mechanical strength and stiffness than acetal copolymer. |  |
|
| Delrin 100 AF contains PTFE fibers to optimize Delrin's sliding friction properties. |  |
|
| Delrin 527UV rods are UV stabilized for enhanced protection against ultraviolet rays. |  |
|
| Delrin/acetal shaft collars have low friction and high mechanical strength, rigidity, and stability. |  |
|
| Shop Black Acetal (POM-C) for excellent machinability, low moisture absorption, & enhanced UV stability. Ideal for tough industrial components. |  |
|
| Shop precision-machinable Copolymer Acetal at Interstate Plastics. Excellent wear resistance, high-strength low friction, moisture-resistant POM-C. |  |
|
| Acetal AF has excellent friction, wear specs. Acetal structure similar to Delrin grades Delrin AF. |  |
|
| Blue metal detectable acetal copolymer for use in food environments. |  |
|
| Blue acetal sheets are FDA compliant and a cost-effective solution for food processing applications. |  |
|
| ESD Acetal contains no carbon fibers or powders and is for clean room use. |  |
|
| Orange acetal & acetal material. Acetal plastic properties make it a tough engineering thermoplastic |  |
|
| Red acetal & acetal material. Acetal plastic properties make it a tough engineering thermoplastic. |  |
|
| Ultra detectable acetal copolymer plate designed for food contact applications. |  |
|
| Acetal AF blend has excellent sliding/friction/wear properties. |  |
|
| Acetal is a tough, stable engineering thermoplastic. |  |
|
| Acetal rod is a tough, stable engineering thermoplastic. Also consider delrin plastic tube. |  |
|
| Blue acetal rods are FDA compliant and a cost-effective solution for food processing applications. |  |
|
| 20% glass filled Delrin 570 has low warpage and high stiffness. Intended for general industrial use. |  |
|
| Ultra detectable acetal copolymer rod designed for food contact applications. |  |
|
| Acetal copolymer tubes have low moisture absorption and high strength, stiffness, and stability. |  |
|
| Acetal tubular bars have low moisture absorption and high strength, stiffness, and stability. |  |
|
| A custom machined wedge part made out of black acetal. |  |
|
| Onsrud router bits specifically designed to route high performance plastics like PEEK & Delrin. |  |
|
| Ultem Semitron ESD 420 is known for its inherent electrostatic dissipative properties. |  |
|
| Acetal roller chains for close-tolerance applications. |  |
|
| Molded spur gears made from acetal. Meets AGMA standards and is food contact safe. |  |
|
| Internally lubricated with enhanced wear and resistance properties versus nylon and acetal. |  |
|
| Includes a 6x6" sample of Acetal, Nylon, UHMW, a 4x4" sample of Tivar HPV and a 3x3" sample of PT. |  |
|
| 6x6" sample of ABS, Acetal, Acrylic, HDPE, PVC, UHMW, and 3x3" sample of PTFE. |  |
|
| Includes a 6x6" sample of Acetal, Nylon, and ABS Machine Grade. |  |
|
| 6x6" sample of ABS, Acetal, Acrylic, Nylon, PVC, UHMW, and a 3x3" sample of PTFE. |  |
|
