Products Displayed: 91 |
Title
| Description | |
| (Polygal Part #472) |  |
|
| (Part #473)
 |  |
|
| Acetal AF blend has excellent sliding/friction/wear properties.
 |  |
|
| Acetal AF has excellent friction, wear specs. Acetal structure similar to Delrin grades Delrin AF.
 |  |
|
| Delrin 100 AF contains PTFE fibers to optimize Delrin's sliding friction properties. |  |
|
| Delrin 100 AF contains PTFE fibers to optimize Delrin's sliding friction properties. |  |
|
| Acetal is a tough, stable engineering thermoplastic.
|  |
|
| Black acetal & acetal material. Acetal plastic properties make it a tough engineering thermoplastic.
|  |
|
| Acetal tubular bars have low moisture absorption and high strength, stiffness, and stability. |  |
|
| Delrin 527UV rods are UV stabilized for enhanced protection against ultraviolet rays. |  |
|
| Delrin 527UV rods are UV stabilized for enhanced protection against ultraviolet rays. |  |
|
| Acetal homopolymer (Delrin) has more mechanical strength and stiffness than acetal copolymer. |  |
|
| Delrin plastic and delrin black (delrin sheet) bridge the gap between metals and plastic.
|  |
|
| Orange acetal & acetal material. Acetal plastic properties make it a tough engineering thermoplastic |  |
|
| Acetal rod is a tough, stable engineering thermoplastic. Also consider delrin plastic tube.
|  |
|
| Acetal copolymer. Good wear properties low friction acetal plastic sheet.
|  |
|
| Acetal homopolymer (Delrin) has more mechanical strength and stiffness than acetal copolymer. |  |
|
| Delrin vs Acetal - Delrin sheets and Delrin plastic offer an excellent balance of properties.
|  |
|
| 20% glass filled Delrin 570 has low warpage and high stiffness. Intended for general industrial use. |  |
|
| ESD Acetal contains no carbon fibers or powders and is for clean room use.
|  |
|
| 20% glass filled Delrin 570 has low warpage and high stiffness. Intended for general industrial use. |  |
|
| Acetal copolymer tubes have low moisture absorption and high strength, stiffness, and stability. |  |
|
| Red acetal & acetal material. Acetal plastic properties make it a tough engineering thermoplastic. |  |
|
| Blue acetal rods are FDA compliant and a cost-effective solution for food processing applications. |  |
|
| Blue acetal sheets are FDA compliant and a cost-effective solution for food processing applications. |  |
|
| Blue metal detectable acetal copolymer for use in food environments. |  |
|
| Ultra detectable acetal copolymer rod designed for food contact applications. |  |
|
| Ultra detectable acetal copolymer plate designed for food contact applications. |  |
|
| A custom machined wedge part made out of black acetal. |  |
|
| Ultem Semitron ESD 420 is known for its inherent electrostatic dissipative properties. |  |
|
| Nylon thrust washers are wear resistant and extend part life.
|  |
|
| Delrin/acetal shaft collars have low friction and high mechanical strength, rigidity, and stability.
|  |
|
| Molded spur gears made from acetal. Meets AGMA standards and is food contact safe.
|  |
|
| Acetal roller chains for close-tolerance applications.
|  |
|
| Stainless steel weld washers will not rust.
|  |
|
| Onsrud router bits specifically designed to route high performance plastics like PEEK & Delrin. |  |
|
| Includes a 6x6" sample of Acetal, Nylon, UHMW, a 4x4" sample of Tivar HPV and a 3x3" sample of PT.
 |  |
|
| 6x6" sample of ABS, Acetal, Acrylic, HDPE, PVC, UHMW, and 3x3" sample of PTFE.
|  |
|
| Includes a 6x6" sample of Acetal, Nylon, and ABS Machine Grade.
|  |
|
| 6x6" sample of ABS, Acetal, Acrylic, Nylon, PVC, UHMW, and a 3x3" sample of PTFE.
|  |
|
| A black HDPE cutting board designed for direct & indirect food contact applications. |  |
|
| A beige HDPE cutting board designed for direct & indirect food contact applications. |  |
|
| A green HDPE cutting board designed for direct & indirect food contact applications. |  |
|
| A red HDPE cutting board designed for direct & indirect food contact applications. |  |
|
| A blue HDPE cutting board designed for direct & indirect food contact applications. |  |
|
| A yellow HDPE cutting board designed for direct & indirect food contact applications. |  |
|
| RDC storm panels for windows pass the Dade County Hurricane test and have extreme impact resistance. |  |
|
| Metal screws for attaching corrugated polycarbonate to metal framing. |  |
|
| Metal screws for attaching corrugated polycarbonate to metal framing. |  |
|
| Carbide-tipped saw blades ideal for cutting brittle plastic.
|  |
|
| Nylatron GSM PA6 (nylon blue) should be considered for any oil-filled Nylon application.
|  |
|
| Nylatron GSM PA6 should be considered for oil-filled Nylon applications.
|  |
|
| Internally lubricated with enhanced wear and resistance properties versus nylon and acetal.
|  |
|
| Internally lubricated with enhanced wear and resistance properties versus nylon and acetal. |  |
|
| Endless applications for architectural design, roofing, glazing, windows and installations.
|  |
|
| Durable & UV-resistant panels for roofing, glazing, data centers, windows, & installations. |  |
|
| A green polycarbonate sheet, 10mm polycarbonate twinwall. |  |
|
| Endless applications for architectural design, roofing, glazing, windows and installations.
|  |
|
| Durable ice (opal) UV-resistant panels for roofing, glazing, data centers, windows, & installations. |  |
|
| A red polycarbonate sheet, 10mm polycarbonate twinwall. |  |
|
| A blue polycarbonate sheet, 10mm polycarbonate twinwall.
|  |
|
| A yellow polycarbonate sheet, 10mm polycarbonate twinwall. |  |
|
| Endless applications for architectural design, roofing, glazing, windows and installations.
|  |
|
| Durable bronze UV-resistant panels for roofing, glazing, data centers, windows, & installations. |  |
|
| Medical grade Noryl is an excellent material for medical devices.
|  |
|
| PET featuring excellent dimensional stability and superior wear, chemical and abrasion resistances. |  |
|
| Self-lubricating engineered thermoplastic turcite kit.
|  |
|
| Turcite X is a self-lubricating engineered thermoplastic turcite material.
|  |
|
| Reprocessed UHMW is recommended for less demanding applications versus virgin.
|  |
|
| Reprocessed UHMW is recommended for less demanding applications versus virgin.
|  |
|
| Reprocessed UHMW is recommended for less demanding applications versus virgin. |  |
|
| Low friction virgin UHMW resists chemicals and impacts and extends part life. |  |
|
| IPX 2000 is an advanced, engineered polyethylene that has greater benefits than standard UHMW.
|  |
|
| Reprocessed UHMW is recommended for less demanding applications versus virgin. |  |
|
| Virgin UHMW is a relatively low cost abrasion, impact, and chemically resistant material.
|  |
|
| Virgin UHMW is a relatively low cost abrasion, impact, and chemically resistant material.
|  |
|
| Reprocessed UHMW features the benefits of virgin UHMW at a more cost-effective price. |  |
|
| Reprocessed UHMW features the benefits of virgin UHMW at a more cost-effective price. |  |
|
| Reprocessed UHMW features the benefits of virgin UHMW at a more cost-effective price. |  |
|
| Onsrud 52-700 series router bits designed to cut soft plastic with a smooth finish. |  |
|
| Onsrud 61-000P series router bits designed for use with plastics.
|  |
|
| Onsrud 70-500 Series HSS High Speed Steel Two Flute Fractional Drill Bits for Plastic.
|  |
|
| Red self-lubricating cast nylon rod with good wear resistance and light weight. |  |
|
| Of the phenolic sheet grades, CE grade phenolic sheet is considered 'electrical' grade. |  |
|
| XX grade paper phenolic is used in mechanical and electrical applications. |  |
|
| Of the phenolic sheet grades, CE grade phenolic rod is considered 'electrical' grade. |  |
|
| Fluorosint® has an excellent combination of low frictional properties and stability. |  |
|
| Fluorosint® has an excellent combination of low frictional properties and stability. |  |
|
| Fluorosint® has an excellent combination of low frictional properties and stability. |  |
|
| Black PET rods available in various sizes and lengths. |  |
|
| Natural PET rods available in various sizes and lengths. |  |
|
