100 results displayed - Please filter results using the menu above or the search bar. |
Title
| Description | |
| Nylatron GSM PA6 (nylon blue) should be considered for any oil-filled Nylon application.
| |
|
| Nylon products are tough, with high strength, dimensional stability, & wear resistance. | |
|
| Nylon MD has a low coefficient of friction, good wear resistance, toughness, & light weight. | |
|
| Extruded nylon rods have a fantastic combination of stability, toughness, and wear resistance. | |
|
| Black Nylon Plastic Material Type Nylon 6 6 Sheet. Extrusion Grade Nylon 66 Sheet. | |
|
| Glass filled nylon sheet: a good combination of toughness, dimensional stability, & wear resistance. | |
|
| Nyloil rod offers great toughness, dimensional stability, wear resistance, and versatility.
| |
|
| An internally lubricated cast nylon 6 sheet with high strength and reduced friction properties. | |
|
| Self-lubricating cast nylon tube with improved dimensional stability over standard cast nylon. | |
|
| Nylatron GSM PA6 should be considered for oil-filled Nylon applications.
| |
|
| Gray tubular nylon bars available for use in various applications.
| |
|
| Solid nylon rod has a good combination of toughness, wear resistance, and versatility.
| |
|
| Nylon MD has a low coefficient of friction, good wear resistance, toughness, & light weight. | |
|
| Nylon 66 rod in MD grade is tough, dimensionally stable, wear resistant, and versatile.
| |
|
| Nylatron GS PA66 cast nylon sheet with improved strength & rigidity & low linear thermal expansion.
| |
|
| Nylon plastic rod has a great combination of toughness, wear resistance, and versatility.
| |
|
| Nylon stock, nylon plate, and nylon products are tough, dimensionally stable & wear resistant.
| |
|
| Nylon has a combination of toughness, dimensional stability, wear resistance, and versatility. | |
|
| Food grade nylon is self lubricating. Nylon food grade nylon rod is approved for food contact.
| |
|
| Nylon tubes and nylon bar have a good combination of toughness and wear resistance.
| |
|
| Extruded nylon tubes & rods have a great combination of toughness, stability, and wear resistance.
| |
|
| Tough, dimensionally stable extruded nylon bushing stock with good wear resistance and versatility. | |
|
| Nylon Plastic Material Type Nylon 6 6 Sheet. Extrusion Grade Nylon 66 Sheet.
| |
|
| Nylon 612 features lower moisture absorption rates than nylon 66 & has better dimensional stability. | |
|
| Flame, Smoke, Toxicity (FST) Retardant nylon for aircraft interior applications | |
|
| Hydlar Z nylon PA66 rod is an abrasion resistant plastic with great wear properties. | |
|
| Hydlar Z nylon PA66 sheets are abrasion resistant plastic sheets with great wear properties. | |
|
| Nylon 12 pressure tubing for robotics and transfer lines; more flexible than nylon 6 or nylon 66. | |
|
| Glass filled nylon rod: a good combination of toughness, dimensional stability, & wear resistance.
| |
|
| Nylatron 703XL PA6 provides an extraordinary amount of control for high precision applications. | |
|
| Nylatron NSM nylon stands up to demanding applications, perfect when larger size parts are required.
| |
|
| Nylatron NSM is considered better than cast nylon rod and nylon rod stock for large part sizes.
| |
|
| Nylatron MC901 blue nylon should be considered for wheels, gears, and custom parts. | |
|
| Nylatron MC901 blue nylon should be considered for wheels, gears, and custom parts. | |
|
| Nylon MD has a low coefficient of friction, good wear resistance, toughness, & light weight. | |
|
| Cast nylon XHA is heat stabilized for use in higher temperature applications than standard nylon. | |
|
| Cast nylon XHA is better suited for higher temperature applications than unmodified cast nylon. | |
|
| Wear resistant flange bushings made from food grade nylon. FDA Approved.
| |
|
| A cylindrical bushing with MD-filled Nylon, available in a variety of sizes.
| |
|
| A cylindrical bushing with MD filled Nylon, available in a variety of sizes.
| |
|
| Nylon thrust washers are wear resistant and extend part life.
| |
|
| Low friction, wear resistant oil-filled nylon bearing insert.
| |
|
| Medium duty oil-filled and low friction machined split pillow block bearings made from nylon.
| |
|
| Solid pillow block bearings made from oil-filled nylon are durable and wear resistant.
| |
|
| Split wall bearings made from natural UHMW or oil-filled food grade nylon with a 5" max bore.
| |
|
| Two bolt flange bearings made from oil-filled nylon have great load bearing capability.
| |
|
| Four bolt flange bearings made from oil-filled nylon have great load bearing capability.
| |
|
| Nylon split collars have low friction properties and can withstand harsh chemicals and high heat.
| |
|
| Nylon shaft collars offer decreased wear and the ability to operate in high heat conditions.
| |
|
| Nylon split static shaft bushings have good wear resistance.
| |
|
| Tongue and groove wear strips available in UHMW and oil-filled nylon options.
| |
|
| Oil-filled nylon spur gears offer longer part life, less operating noise, and lighter weight than me
| |
|
| Oil-filled nylon gear racks have longer life and decreased operating noise over standard gear racks.
| |
|
| Oil-filled nylon gear racks have longer life and decreased operating noise over standard gear racks.
| |
|
| L timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
| |
|
| L timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
| |
|
| H timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
| |
|
| L timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
| |
|
| H timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
| |
|
| H timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
| |
|
| H timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
| |
|
|
| |
|
| L timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
| |
|
| L timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
| |
|
| H timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
| |
|
| H timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
| |
|
| H timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
| |
|
| FDA compliant no. 25 food grade nylon roller chain sprockets.
| |
|
| FDA compliant no. 35 oil-filled food grade nylon roller chain sprockets.
| |
|
| FDA compliant no. 40 food grade nylon roller chain sprockets.
| |
|
| FDA compliant no. 50 oil-filled food grade nylon roller chain sprockets.
| |
|
| FDA compliant no. 60 oil-filled food grade nylon roller chain sprockets.
| |
|
| FDA compliant no. 80 oil-filled food grade nylon roller chain sprockets.
| |
|
| Stub shafts made from black nylon have wear resistance, rigidity, and dimensional stability.
| |
|
| Nylon roller chains have low friction and high creep, impact, and abrasion resistance.
| |
|
| No. 25 nylon roller chain sprockets with great wear properties.
| |
|
| Red self-lubricating cast nylon rod with good wear resistance and light weight. | |
|
| Includes a 6x6" sample of Acetal, Nylon, UHMW, a 4x4" sample of Tivar HPV and a 3x3" sample of PT.
| |
|
| Includes a 6x6" sample of Acetal, Nylon, and ABS Machine Grade.
| |
|
| 6x6" sample of ABS, Acetal, Acrylic, Nylon, PVC, UHMW, and a 3x3" sample of PTFE.
| |
|
| Standard Nylon Cable Ties in Black.
| |
|
| Standard Nylon Cable Ties in White/Natural Color.
| |
|
| A custom messer with a fuller made from cast nylon. | |
|
| Carbide-tipped saw blades ideal for cutting brittle plastic.
| |
|
| Hydex 4101 PBT rods have higher impact resistance than PET-P and are food grade plastics. | |
|
| Internally lubricated with enhanced wear and resistance properties versus nylon and acetal.
| |
|
| Internally lubricated with enhanced wear and resistance properties versus nylon and acetal. | |
|
| Molded four bolt flange bearings with an oil-filled UHMW insert, FDA/USA approved.
| |
|
| Molded solid pillow block bearings made from UHMW, FDA approved.
| |
|
| Molded two bolt flange bearings with an oil-filled UHMW insert.
| |
|
| Sleeve Bushing - High Temperature, Cylindrical, Spec Polymer. Multiple materials available.
| |
|
| Flange Bushings - High Temperature, Spec Polymer.
| |
|
| UHMW split pillow block bearings are self-aligning and resistant to corrosion.
| |
|
| UHMW split pillow block bearings are self-aligning and resistant to corrosion.
| |
|
| UHMW solid pillow block bearings are low friction and corrosion resistant.
| |
|
| Machined two bolt flange UHMW bearings.
| |
|
| Machined four bolt flange UHMW bearings.
| |
|
| H timing belt pulleys are made from moly-filled nylon (nylon MDS) and have a low COF.
| |
|
| Polypropylene roller chains are recommended for lower load requirement applications.
| |
|
| No. 35 UHMW roller chain sprockets with reduced friction properties.
| |
|