Products Displayed: 42 |
Title
| Description | |
| Acetal tubular bars have low moisture absorption and high strength, stiffness, and stability. |  |
|
| Acetal copolymer tubes have low moisture absorption and high strength, stiffness, and stability. |  |
|
| Acrylic sheet is 17 times stronger than glass, has excellent clarity, durability, & is lightweight.
 |  |
|
| PMMA, Poly(methyl methacrylate)
|  |
|
| Laminated plastics manufactured by infusing textiles with thermosetting resins and solid lubricants.
|  |
|
| FEP is a melt-processable material that features several of PTFE's exceptional characteristics. |  |
|
| Bundles of 6" Length HIX Polyolefin Heat Shrink Wrap Tubing.
|  |
|
| Bundles of HIX Shrinkable Polyolefin Shrink Wrap Tubing in 4ft. lengths.
 |  |
|
| Cost-effective flexible clear Tygon tube alternative with outstanding chemical resistance. |  |
|
| Nylatron GSM PA6 (nylon blue) should be considered for any oil-filled Nylon application.
|  |
|
| Self-lubricating cast nylon tube with improved dimensional stability over standard cast nylon. |  |
|
| Gray tubular nylon bars available for use in various applications.
|  |
|
| Nylon tubes and nylon bar have a good combination of toughness and wear resistance.
|  |
|
| Tough, dimensionally stable extruded nylon bushing stock with good wear resistance and versatility. |  |
|
| Nylon 12 pressure tubing for robotics and transfer lines; more flexible than nylon 6 or nylon 66. |  |
|
| Cast nylon XHA is better suited for higher temperature applications than unmodified cast nylon. |  |
|
| With its superior heat resistance, Torlon is the highest performing melt processable plastic.
|  |
|
| High compressive strength, low deformation under load and stability within a wide thermal range. |  |
|
| Ultem offers high strength and excellent resistance to flame and heat. |  |
|
| 30% glass fiber reinforced polyethermide tube features excellent dimensional stability. | |
|
| 30% carbon filled compression molded PEEK has enhanced compressive strength and stiffness. |  |
|
| PEEK XP-98T has been modified with 30% carbon fiber for increased rigidity and strength. |  |
|
| 30% glass filled compression molded XP-91 PEEK for industrial applications. |  |
|
| Unfilled natural PEEK tube has very good resistance to chemicals, abrasion, and wear. |  |
|
| Bearing grade PEEK HPV has the lowest coefficient of friction (COF) of all PEEK grades. |  |
|
| PEEK is high heat resistant engineered thermoplastic with excellent chemical and fatigue resistance. |  |
|
| G10 FR4 tubes suitable for structural, high humidity, and electrical insulation applications. | |
|
| A very durable clear polycarbonate tube.
|  |
|
| 30% carbon filled PPS is reinforced with carbon fiber to increase its stiffness and strength. |  |
|
| 40% glass-filled PPS features greater dimensional stability & thermal properties than unfilled PPS. |  |
|
| Polyurethane combines the elasticity of rubber and the durability of metal. |  |
|
| High-performance alternative to rubber tube, Tygon A-60-G, Norprene, and EPDM industrial tubing. |  |
|
| Flexible polyurethane tubing with high tear strength and abrasion resistance. |  |
|
| Polyurethane combines the elasticity of rubber and the durability of metal. |  |
|
| Thermoplastic Elastomer (TPE) tubing for use in food, dairy, and cosmetic processing.
|  |
|
| High performance flexible non-toxic PVC tubing for beverage transfer. Excellent chemical resistance. |  |
|
| PVC tubing for transferring liquids & gases in laboratory applications. Tygon 3603 equivalent. |  |
|
| Excelon Fuel & Lubricant tubing protects against contamination and leaking during chemical transfer. |  |
|
| Fluorosint® has an excellent combination of low frictional properties and stability. |  |
|
| Extruded PTFE tubes withstand high heat temperatures, corrosion, and harsh chemicals. |  |
|
| PTFE tubing has the lowest coefficient of friction of any plastic and allows build-up free flow.
|  |
|
| UHMW is a relatively low cost abrasion, impact, and chemically resistant material.
|  |
|
