Products Displayed: 58 |
Title
| Description | |
| Reaches 120 Volts, 1550 Watts |  |
|
| Replacement Heating element for the Triac S - LEISTER® |  |
|
| Bundles of HIX Shrinkable Polyolefin Shrink Wrap Tubing in 4ft. lengths. |  |
|
| Bundles of 6" Length HIX Polyolefin Heat Shrink Wrap Tubing. |  |
|
| Nycast 300 is heat-stabilized and handles continuous operating temperatures up to 300°F. |  |
|
| G-11 phenolic rod is a high heat plastic suitable for continuous use at elevated temperatures. |  |
|
| Flexible polyurethane tubing with high tear strength and abrasion resistance. |  |
|
| 136.231 Leister Pre-Heat Reflector |  |
|
| Lighter, quieter, and more durable than any heat gun on the market. |  |
|
| Heating element for LEISTER Hot Jet S |  |
|
| Consumer 24" 55-Watt Plastrip Heater. |  |
|
| Preheat Nozzle for the Leister Weldplast S4 |  |
|
| Preheat Nozzle for the Leister Weldplast S4 |  |
|
| Preheat Nozzle for the Leister Weldplast S4 |  |
|
| Ultem offers high strength and excellent resistance to flame and heat. |  |
|
| Cast nylon XHA is heat stabilized for use in higher temperature applications than standard nylon. |  |
|
| CPVC is a durable material with higher heat resistance & more flexibility compared to standard PVC. |  |
|
| Pink Kydex is a popular plastic for thermoforming stylish and durable gun holsters and knife sheaths |  |
|
| Purple Kydex is a popular plastic for thermoforming stylish, durable gun holsters and knife sheaths. |  |
|
| PEEK is high heat resistant engineered thermoplastic with excellent chemical and fatigue resistance. |  |
|
| Shop black PEEK sheet for machined components exposed to high heat and chemicals. This high-performance material has good machinability. |  |
|
| A rigid, high-strength, semi-tough thermoplastic that has a heat deflection temperature of 345?F. |  |
|
| Acrylic mirror for surveillance, special use & theatrical applications. Also comes in polycarbonate. |  |
|
| Shop TIVAR® H.O.T. UHMW sheets for extreme environments. Resists oxidation & extends wear life up to 10x in high-heat applications up to 275°F. |  |
|
| Excellent wear resistance in bearing grades. Endures high heat, chemical and stress conditions. |  |
|
| Shop Ultem® 1000 (PEI) at Interstate Plastics. High-performance plastic with strength, creep resistance, and stability under high heat. |  |
|
| PEEK is high heat resistant engineered thermoplastic with excellent chemical and fatigue resistance. |  |
|
| Ultem offers high strength and excellent resistance to flame and heat. |  |
|
| Ultem offers high strength and excellent resistance to flame and heat. |  |
|
| CPVC is a durable material with higher heat resistance & more flexibility compared to standard PVC. |  |
|
| G-7 grade phenolic is preferred for applications where arc or high heat resistance is necessary. |  |
|
| G-9 grade phenolic has good mechanical properties & high resistance to heat & alkali solutions. |  |
|
| Ultem offers high strength and excellent resistance to flame and heat. |  |
|
| PEEK is high heat resistant engineered thermoplastic with excellent chemical and fatigue resistance. |  |
|
| PEEK is high heat resistant engineered thermoplastic with excellent chemical and fatigue resistance. |  |
|
| PTFE is resistant to heat and chemicals. PTFE is considered the slipperiest material in existence. |  |
|
| PTFE rods resist heat and chemicals. PTFE block is used for low friction applications. |  |
|
| Shop TIVAR® H.O.T. UHMW rod. Extends part life in high-heat applications up to 275°F. |  |
|
| Torlon is the highest performing melt processable plastic. It has superior resistance to heat. |  |
|
| Excellent wear resistance in bearing grades. Endures high heat, chemical and stress conditions. |  |
|
| Ultem offers high strength and excellent resistance to flame and heat. |  |
|
| Ultem 1000 offers high strength and excellent resistance to flame and heat. |  |
|
| PEEK is high heat resistant engineered thermoplastic with excellent chemical and fatigue resistance. |  |
|
| Ultem offers high strength and excellent resistance to flame and heat. |  |
|
| Extruded PTFE tubes withstand high heat temperatures, corrosion, and harsh chemicals. |  |
|
| With its superior heat resistance, Torlon is the highest performing melt processable plastic. |  |
|
| For flameless shrinking of pallets and bulk goods. |  |
|
| LEISTER GHIBLI offers strain-free operation while welding or shrinking with hot-air. |  |
|
| TRIAC AT an intelligent and robust hot-air hand tool for plastic welding and shrinking. |  |
|
| Nylon shaft collars offer decreased wear and the ability to operate in high heat conditions. |  |
|
| Nylon split collars have low friction properties and can withstand harsh chemicals and high heat. |  |
|
| Boltaron 4332 holster grade thermoforming sheet has resistance to impacts, chemicals, and abrasion. |  |
|
| Boltaron 4332 holster grade thermoforming sheet has resistance to impacts, chemicals, and abrasion. |  |
|
| Boltaron 4332 holster grade thermoforming sheet has resistance to impacts, chemicals, and abrasion. |  |
|
| Similar composition to G-10. G-11 phenolic is used at higher temperatures that G-10 cannot handle. |  |
|
| Polysulfone Rods are known for their high thermal and mechanical capacity. |  |
|
| PROPYLUX® HS products deliver the required attributes for orthopedic applications. |  |
|
| Cast nylon XHA is better suited for higher temperature applications than unmodified cast nylon. |  |
|
