Searching For: Tivar 1000


100 results displayed - Please filter results using the menu above or the search bar.
Title  

Description 
TIVAR® H.O.T. UHMW Bottom Slide
A custom TIVAR® H.O.T. UHMW bottom slide.TIVAR<sup>®</sup> H.O.T. UHMW Bottom Slide

UHMW H.O.T. Bearing
A natural UHMW H.O.T. bearing.UHMW H.O.T. Bearing

UHMW Dovetail
A custom UHMW part with a dovetail joint.UHMW Dovetail

UHMW Snap-On EPP-705 10 ft.
Fast economical way to turn an abrasive metal component into a long wearing, non marring component.UHMW Snap-On EPP-705 10 ft.

Durasurf ETA UHMW Pressure-Sensitive Tape
50ft. Rolls of Easy to Apply (ETA) Adhesive Backed UHMW Tape.
Durasurf ETA UHMW Pressure-Sensitive Tape

Long Double Divider Slide Block | UHMW H.O.T.
A custom long double divider slide block.Long Double Divider Slide Block | UHMW H.O.T.

Short Double Divider Slide Block | UHMW H.O.T.
A custom short double divider slide block.Short Double Divider Slide Block | UHMW H.O.T.

UHMW H.O.T. Bearing Block
A UHMW H.O.T. bearing block.UHMW H.O.T. Bearing Block

UHMW H.O.T. Bearing Block 41724
A UHMW H.O.T. bearing block.UHMW H.O.T. Bearing Block 41724

UHMW H.O.T. Bearing Block Perch / Squeeze
A custom UHMW H.O.T. bearing block perch/squeeze.UHMW H.O.T. Bearing Block Perch / Squeeze

UHMW Bearing Stop | Natural
A custom natural UHMW bearing stop.UHMW Bearing Stop | Natural

UHMW H.O.T. Divider Slide
A custom divider slide made from UHMW H.O.T.UHMW H.O.T. Divider Slide

UHMW H.O.T. Door Slide Guide
Custom door slide guide made from UHMW H.O.T.UHMW H.O.T. Door Slide Guide

UHMW Door Slide | Baboon
A natural UHMW door slide.UHMW Door Slide | Baboon

UHMW H.O.T. Bottom Divider Slide
A custom UHMW H.O.T. bottom divider slide.UHMW H.O.T. Bottom Divider Slide

Slide Block 4.5 Cage | UHMW H.O.T.
A custom UHMW H.O.T. slide block cage.Slide Block 4.5 Cage | UHMW H.O.T.

Long Single Divider Slide Block | UHMW H.O.T.
A long custom UHMW H.O.T. divider slide block.Long Single Divider Slide Block | UHMW H.O.T.

UHMW Slide | Natural
A custom natural UHMW slide.UHMW Slide | Natural

Slide Block 4.5 Cage | Natural UHMW
A custom natural UHMW slide block cage.Slide Block 4.5 Cage | Natural UHMW

UHMW H.O.T. Bearing Block | Pig Tail Cage
A custom bearing block made from UHMW H.O.T.UHMW H.O.T. Bearing Block | Pig Tail Cage

UHMW H.O.T. Squeeze Handle Slide 34807
A custom UHMW H.O.T. squeeze handle slide.UHMW H.O.T. Squeeze Handle Slide 34807

UHMW H.O.T. Squeeze Handle Slide 34808
A custom UHMW H.O.T. squeeze handle slide.UHMW H.O.T. Squeeze Handle Slide 34808

Top Divider Slide | UHMW H.O.T.
A custom top divider slideTop Divider Slide | UHMW H.O.T.

Transfer Cage Guide | Natural UHMW
A custom transfer cage guide.Transfer Cage Guide | Natural UHMW

UHMW H.O.T. 3" Bearing
A custom 3" UHMW H.O.T. bearing.UHMW H.O.T. 3" Bearing

UHMW Backup Bar | Black
A custom black reprocessed UHMW backup bar.UHMW Backup Bar | Black

UHMW H.O.T. Latching Bar Bearing Block
A custom UHMW. H.O.T. latching bar bearing block.UHMW H.O.T. Latching Bar Bearing Block

UHMW Bearing | Natural
A natural UHMW bearing.UHMW Bearing | Natural

UHMW Corner Guide | Black Reprocessed
A custom corner guide made from black reprocessed UHMW.UHMW Corner Guide | Black Reprocessed

Reprocessed UHMW Coupler Wear Plate
A custom reprocessed UHMW coupler wear plate.Reprocessed UHMW Coupler Wear Plate

Reprocessed UHMW Coupler Wear Plate | Black
A custom reprocessed UHMW coupler wear plate.Reprocessed UHMW Coupler Wear Plate | Black

Notched UHMW Bumper
A notched UHMW bumper.Notched UHMW Bumper

UHMW H.O.T. Bumper 6.2
A custom UHMW H.O.T. bumper 6.2.UHMW H.O.T. Bumper 6.2

UHMW Chain Guide | Natural
A custom natural UHMW chain guide.UHMW Chain Guide | Natural

UHMW H.O.T. Divider Slide | DWG 36639
A custom divider slide made from UHMW H.O.T.UHMW H.O.T. Divider Slide | DWG 36639

UHMW Door Slide for Side Door | Natural
A natural UHMW Door Slide for Side Door.UHMW Door Slide for Side Door | Natural

UHMW H.O.T. Foraging Board
A custom UHMW H.O.T. foraging board.UHMW H.O.T. Foraging Board

UHMW H.O.T. Handle Bearing Block
A custom UHMW H.O.T. handle bearing block.UHMW H.O.T. Handle Bearing Block

UHMW H.O.T. Rear Bumper
A UHMW H.O.T. rear bumper.UHMW H.O.T. Rear Bumper

UHMW H.O.T. Squeeze Slide Block
A custom UHMW H.O.T. squeeze slide block.UHMW H.O.T. Squeeze Slide Block

UHMW H.O.T. Vertical Tunnel Slide Channel
A custom UHMW H.O.T. vertical tunnel slide channel.UHMW H.O.T. Vertical Tunnel Slide Channel

Oil Filled UHMW Chain Guide
A custom oil filled UHMW chain guide.Oil Filled UHMW Chain Guide

Black Ultem 1000 Rod
Ultem offers high strength and excellent resistance to flame and heat.Black Ultem 1000 Rod

Natural Ultem 1000 Rod
Ultem offers high strength and excellent resistance to flame and heat.Natural Ultem 1000 Rod

UHMW BEARING - ROLL END | PIPE SCH. 40 & 80 - LIGHT DUTY
Molded UHMW roll end bearings.
UHMW BEARING - ROLL END | PIPE SCH. 40 & 80 - LIGHT DUTY

FOUR BOLT FLANGE - FDA - USDA | W/OIL-FILLED UHMW INSERT
Molded four bolt flange bearings with an oil-filled UHMW insert, FDA/USA approved.
FOUR BOLT FLANGE - FDA - USDA | W/OIL-FILLED UHMW INSERT

PILLOW BLOCK - FDA - USDA - W/OIL-FILLED UHMW INSERT | 3/4 BORE
Molded solid pillow block bearings made from UHMW, FDA approved.
PILLOW BLOCK - FDA - USDA - W/OIL-FILLED UHMW INSERT | 3/4 BORE

TWO BOLT FLANGE - FDA - USDA | W/OIL -FILLED UHMW INSERT
Molded two bolt flange bearings with an oil-filled UHMW insert.
TWO BOLT FLANGE - FDA - USDA | W/OIL -FILLED UHMW INSERT

WALL BEARING - SPLIT | NATURAL UHMW | OIL FILLED FG NYLON | 5" MAX BORE
Split wall bearings made from natural UHMW or oil-filled food grade nylon with a 5" max bore.
WALL BEARING - SPLIT | NATURAL UHMW | OIL FILLED FG NYLON | 5" MAX BORE

UHMW REPRO SHAFT COLLARS | STAINLESS STEEL HARDWARE
Shaft collars made from reprocessed UHMW are used in less demanding applications than virgin.
UHMW REPRO SHAFT COLLARS | STAINLESS STEEL HARDWARE

UHMW FLANGE BEARING INSERTS (STANDARD DUTY)
UHMW Flange Bearing Inserts (Standard Duty)
UHMW FLANGE BEARING INSERTS (STANDARD DUTY)

BUSHING - SPLIT STATIC SHAFT | NATURAL UHMW | 2-15/16" MAX BORE - 6-1/8" LENGTH - 4-1/2" OD
Natural UHMW split static shaft bushings.
BUSHING - SPLIT STATIC SHAFT | NATURAL UHMW | 2-15/16" MAX BORE - 6-1/8" LENGTH - 4-1/2" OD

INSERTS- ROLL END BEARING- UHMW- 3/8" THRU BORE
UHMW roll end bearing inserts excel in corrosion-sensitive applications.
INSERTS- ROLL END BEARING- UHMW- 3/8" THRU BORE

BEARING - SPLIT PILLOW BLOCK | HEAVY DUTY - UHMW - 2 (1/2") BOLT - 2 1/2" MAX BORE
UHMW split pillow block bearings are self-aligning and resistant to corrosion.
BEARING - SPLIT PILLOW BLOCK | HEAVY DUTY - UHMW - 2 (1/2") BOLT - 2 1/2" MAX BORE

BEARING- SPLIT PILLOW BLOCK | MEDIUM DUTY - UHMW- 2 (3/8") BOLT - 1/2" IDLER BORE
UHMW split pillow block bearings are self-aligning and resistant to corrosion.
BEARING- SPLIT PILLOW BLOCK | MEDIUM DUTY - UHMW- 2 (3/8") BOLT - 1/2" IDLER BORE

BEARING - PILLOW BLOCK | UHMW - 1/2" BORE
UHMW solid pillow block bearings are low friction and corrosion resistant.
BEARING - PILLOW BLOCK | UHMW - 1/2" BORE

BEARING - ROLL END | UHMW - HEAVY DUTY - 18" TUBING GAGE
Heavy duty UHMW roll end bearings excel in corrosion-sensitive applications.
BEARING - ROLL END | UHMW - HEAVY DUTY - 18" TUBING GAGE

BEARING - ROLL END | UHMW - STANDARD DUTY - 20" TUBING GAGE
Standard duty UHMW roll end bearings excel in corrosion-sensitive applications.
BEARING - ROLL END | UHMW - STANDARD DUTY - 20" TUBING GAGE

BEARING - ROLL END | UHMW - HEAVY DUTY - 16" TUBING GAGE
Heavy duty UHMW roll end bearings excel in corrosion-sensitive applications.
BEARING - ROLL END | UHMW - HEAVY DUTY - 16" TUBING GAGE

WALL BEARING- SPLIT- NATURAL UHMW- 4-7/16" DIAMETER STANDARD BORE- 316 SS HARDWARE AND FITTINGS
Natural UHMW wall bearings have low coefficient of friction.
WALL BEARING- SPLIT- NATURAL UHMW- 4-7/16" DIAMETER STANDARD BORE- 316 SS HARDWARE AND FITTINGS

BEARING - FLANGE - 2 BOLT | UHMW 1/2" BORE
Machined two bolt flange UHMW bearings.
BEARING - FLANGE - 2 BOLT | UHMW 1/2" BORE

BEARING - FLANGE - 4 BOLT | UHMW - 1/2" BORE
Machined four bolt flange UHMW bearings.
BEARING - FLANGE - 4 BOLT | UHMW - 1/2" BORE

DISCS - MACHINED | UHMW - 1-1/4" THICK - 9" DIAMETER
Machined UHMW discs 1 1/4" thick with a 9" diameter.
DISCS - MACHINED | UHMW - 1-1/4" THICK - 9" DIAMETER

RACEWAY - CHAIN GUIDE | UHMW | 2040 ANSI CHAIN | 1 1/4" BASE - 5/16" HEIGHT - 10
Race Way UHMW Chain Guide, 2040 ANSI chain.
RACEWAY - CHAIN GUIDE | UHMW | 2040 ANSI CHAIN | 1 1/4" BASE - 5/16" HEIGHT - 10

WEARSTRIPS - EXTRUDED COIL - UHMW | 1/8" THICK - 1" WIDTH - 50
Extruded coil wear strips are made from 1/8" thick UHMW and are 50 ft. in length.
WEARSTRIPS - EXTRUDED COIL - UHMW | 1/8" THICK - 1" WIDTH - 50

TAPE - PRESSURE SENSITIVE - UHMW | .125 THICK - 7" WIDTH - 50
Pressure sensitive UHMW tape.
TAPE - PRESSURE SENSITIVE - UHMW | .125 THICK - 7" WIDTH - 50

BELT GUIDE - TYPE R - UHMW | 3/16" BELT - .75" BASE - .38" HEIGHT - 10
Type R UHMW Belt Guides are engineered to match round belts for the longest life and performance pos
BELT GUIDE - TYPE R - UHMW | 3/16" BELT - .75" BASE - .38" HEIGHT - 10

BELT GUIDE - TYPE V - UHMW | M BELT - .75" BASE - .38" HEIGHT - 10
Long life and high performance Type V UHMW belt guide for V-belts.
BELT GUIDE - TYPE V - UHMW | M BELT - .75" BASE - .38" HEIGHT - 10

CHAIN GUIDE - TYPE T - UHMW | #100 ANSI CHAIN - 1.61" BASE - 1.00" HEIGHT - 10
Type T UHMW chain guide. #100 ANSI chain.
CHAIN GUIDE - TYPE T - UHMW | #100 ANSI CHAIN - 1.61" BASE - 1.00" HEIGHT - 10

CHAIN GUIDE - TYPE TD - DOUBLE STRAND - UHMW | #25-2 ANSI CHAIN - .78" BASE - .59" HEIGHT - 10
Type TD UHMW chain guide, double strand. #25-2 ANSI chain.
CHAIN GUIDE - TYPE TD - DOUBLE STRAND - UHMW | #25-2 ANSI CHAIN - .78" BASE - .59" HEIGHT - 10

CHAIN GUIDE - TYPE U - UHMW | #25 ANSI CHAIN - .78" BASE - .59" HEIGHT - 10
Type U UHMW chain guide. #25 ANSI chain.
CHAIN GUIDE - TYPE U - UHMW | #25 ANSI CHAIN - .78" BASE - .59" HEIGHT - 10

CHAIN GUIDE - TYPE K - UHMW- | #25 ANSI CHAIN - .78" BASE - .88" HEIGHT - 10
Type K UHMW chain guide, #25 ANSI chain.
CHAIN GUIDE - TYPE K - UHMW- | #25 ANSI CHAIN - .78" BASE - .88" HEIGHT - 10

PULLEY - CAN LINE CABLE | 3/8" ROUND BELT - UHMW - 3.00" OD - 5/8" WIDTH
UHMW Can Line Cable Pulleys.
PULLEY - CAN LINE CABLE | 3/8" ROUND BELT - UHMW - 3.00" OD - 5/8" WIDTH

WEARSTRIP - FILLER | REPRO UHMW - 120" L - 3/8" THK- 2" W
Reprocessed UHMW filler WWT wear strips.
WEARSTRIP - FILLER | REPRO UHMW - 120" L - 3/8" THK- 2" W

WEARSTRIP - STARTER - REPRO UHMW - 120" L - 3/8" THK - 2" W
Reprocessed UHMW starter WWT wearstrips.
WEARSTRIP - STARTER - REPRO UHMW - 120" L - 3/8" THK - 2" W

WEARSHOES - CARRYING - UHMW REPRO - 5 1/2" WIDTH - 4 (1/2") HOLES
5.5" wide reprocessed UHMW wearshoes (carrying).
WEARSHOES - CARRYING - UHMW REPRO - 5 1/2" WIDTH - 4 (1/2") HOLES

WEARSHOES - SINGLE HOLE RETURN - UHMW REPRO - 4" WIDTH - 2 (1/2") HOLES
Reprocessed UHMW wearshoes (single hole return).
WEARSHOES - SINGLE HOLE RETURN - UHMW REPRO - 4" WIDTH - 2 (1/2") HOLES

WEARSHOES - DOUBLE HOLE RETURN - UHMW REPRO - 4 1/2" WIDTH - 4 (1/2") HOLES
Reprocessed UHMW wearshoes (double hole return).
WEARSHOES - DOUBLE HOLE RETURN - UHMW REPRO - 4 1/2" WIDTH - 4 (1/2") HOLES

WEARSTRIP - RADIUS CURVE - UHMW | CHAIN # 880 - 881 - 18 DEG CORNER RADIUS - 1 - 1/2" WIDTH
UHMW radius curve wear strips with low friction properties.
WEARSTRIP - RADIUS CURVE - UHMW | CHAIN # 880 - 881 - 18 DEG CORNER RADIUS - 1 - 1/2" WIDTH

TRACK - 90 DEG. CORNERS - COMBINATION - TAB DESIGN W/ EXTENSIONS | UHMW - 18" STANDARD RADIUS - 4" W
UHMW tracks with a tab design - 90 degree corners.
TRACK - 90 DEG. CORNERS - COMBINATION - TAB DESIGN W/ EXTENSIONS | UHMW - 18" STANDARD RADIUS - 4" W

TRACK - 90 DEG. CORNERS - COMBINATION - BEVEL DESIGN W/ EXTENSIONS | UHMW - 18" STANDARD RADIUS
UHMW track with a bevel design and 90 degree corners.
TRACK - 90 DEG. CORNERS - COMBINATION - BEVEL DESIGN W/ EXTENSIONS | UHMW - 18" STANDARD RADIUS

TRACK - 90 DEG. CORNERS - TAB DESIGN W/ EXTENSIONS | UHMW - 18" STANDARD RADIUS - 4" WIDTH - 1" HEIG
UHMW tracks with a tab design - 90 degree corners.
TRACK - 90 DEG. CORNERS - TAB DESIGN W/ EXTENSIONS | UHMW - 18" STANDARD RADIUS - 4" WIDTH - 1" HEIG

TRACK - 90 DEG. CORNERS - CARRYING - BEVEL DESIGN W/ EXTENSIONS | UHMW - 18" STANDARD RADIUS - 4" WI
UHMW tracks with a carrying bevel design - 90 degree corners.
TRACK - 90 DEG. CORNERS - CARRYING - BEVEL DESIGN W/ EXTENSIONS | UHMW - 18" STANDARD RADIUS - 4" WI

TRACK - 90 DEG. CORNERS - RETURN - BEVEL DESIGN W/ EXTENSIONS | UHMW - 18" STANDARD RADIUS - 4" WIDT
UHMW tracks with a return bevel design - 90 degree corners.
TRACK - 90 DEG. CORNERS - RETURN - BEVEL DESIGN W/ EXTENSIONS | UHMW - 18" STANDARD RADIUS - 4" WIDT

WEARSTRIPS - TONGUE & GROOVE | UHMW / OIL FILLED NYLON | 1/4" THICK- 24" LENGTH
Tongue and groove wear strips available in UHMW and oil-filled nylon options.
WEARSTRIPS - TONGUE & GROOVE | UHMW / OIL FILLED NYLON | 1/4" THICK- 24" LENGTH

PULLEY - V BELT SHEAVES - A BELT - UHMW | 1.75" OD- 3/4" WIDTH - 1/4" STOCK BORE
V-belt sheaves for type "A" belts are machined from UHMW for high performance and long life.
PULLEY - V BELT SHEAVES - A BELT - UHMW | 1.75" OD- 3/4" WIDTH - 1/4" STOCK BORE

PULLEY - V BELT SHEAVES - B BELT - UHMW | 3.75" OD - 1" WIDTH - 1/2" STOCK BORE
V-belt sheaves for type "B" belts are machined from UHMW for high performance and long life.
PULLEY - V BELT SHEAVES - B BELT - UHMW | 3.75" OD - 1" WIDTH - 1/2" STOCK BORE

PULLEY - FLAT BELT - UHMW | 3" OD - 1" WIDTH - 1/4" STOCK BORE
UHMW flat belt pulleys have low friction and extend part life.
PULLEY - FLAT BELT - UHMW | 3" OD - 1" WIDTH - 1/4" STOCK BORE

PULLEY- 1/4" ROUND BELT - UHMW | 1 1/2" OD - 1/2" WIDTH - 1/4" STOCK BORE
High performance, long part life 1/4" round belt UHMW pulleys.
PULLEY- 1/4" ROUND BELT - UHMW | 1 1/2" OD - 1/2" WIDTH - 1/4" STOCK BORE

PULLEY - 3/8" ROUND BELT - UHMW | 2" OD - 5/8" WIDTH - 1/4" STOCK BORE
High performance, long part life 3/8" round belt UHMW pulleys.
PULLEY - 3/8" ROUND BELT - UHMW | 2" OD - 5/8" WIDTH - 1/4" STOCK BORE

PULLEY - 1/2" ROUND BELT - UHMW | 3" OD - 3/4" WIDTH - 1/4" STOCK BORE
High performance, long part life 1/2" round belt UHMW pulleys.
PULLEY - 1/2" ROUND BELT - UHMW | 3" OD - 3/4" WIDTH - 1/4" STOCK BORE

SPROCKET - MILL - 124 SERIES - 4.000" PITCH - A PLATE | UHMW REPRO - 6 TEETH - 1" STOCK BORE
Mill sprockets made from reprocessed UHMW.
SPROCKET - MILL - 124 SERIES - 4.000" PITCH - A PLATE | UHMW REPRO - 6 TEETH - 1" STOCK BORE

SPROCKET - MILL - 1030 SERIES - 3.075" PITCH - A PLATE | UHMW REPRO - 8 TEETH - 1" STOCK BORE
Mill sprockets made from reprocessed UHMW.
SPROCKET - MILL - 1030 SERIES - 3.075" PITCH - A PLATE | UHMW REPRO - 8 TEETH - 1" STOCK BORE

SPROCKET - MILL - 132 SERIES - 6.050" PITCH - A PLATE | UHMW REPRO - 6 TEETH - 1" STOCK BORE
Mill sprockets made from reprocessed UHMW.
SPROCKET - MILL - 132 SERIES - 6.050" PITCH - A PLATE | UHMW REPRO - 6 TEETH - 1" STOCK BORE

SPROCKET - AGRICULTURE - 55 SERIES - 1.631" PITCH - A PLATE | UHMW REPRO - 6 TEETH - 1/2" STOCK BORE
Agricultural sprockets made from reprocessed UHMW.
SPROCKET - AGRICULTURE - 55 SERIES - 1.631" PITCH - A PLATE | UHMW REPRO - 6 TEETH - 1/2" STOCK BORE

SPROCKET - AGRICULTURE - 78 SERIES - 2.609" PITCH | A PLATE - UHMW REPRO - 4 TEETH - 1/2" STOCK BORE
Agricultural sprockets made from reprocessed UHMW.
SPROCKET - AGRICULTURE - 78 SERIES - 2.609" PITCH | A PLATE - UHMW REPRO - 4 TEETH - 1/2" STOCK BORE

SPROCKET - MILL - 82 SERIES - 3.075" PITCH - A PLATE | UHMW REPRO - 7 TEETH - 1" STOCK BORE
Mill sprockets made from reprocessed UHMW.
SPROCKET - MILL - 82 SERIES - 3.075" PITCH - A PLATE | UHMW REPRO - 7 TEETH - 1" STOCK BORE

SPROCKET - MILL - 124 SERIES - 4.000" PITCH - C HUB | UHMW REPRO - 6 TEETH - 3" MAX BORE- 3 3/4" LTB
Mill sprockets made from reprocessed UHMW.
SPROCKET - MILL - 124 SERIES - 4.000" PITCH - C HUB | UHMW REPRO - 6 TEETH - 3" MAX BORE- 3 3/4" LTB

SPROCKET - MILL - 1030 SERIES - 3.075" PITCH - C HUB | UHMW REPRO - 8 TEETH - 3" MAX BORE - 3 3/4" L
Mill sprockets made from reprocessed UHMW.
SPROCKET - MILL - 1030 SERIES - 3.075" PITCH - C HUB | UHMW REPRO - 8 TEETH - 3" MAX BORE - 3 3/4" L

SPROCKET- MILL - 132 SERIES - 6.050" PITCH - C HUB | UHMW REPRO - 6 TEETH - 3" MAX BORE - 6" LTB
Mill sprockets made from reprocessed UHMW.
SPROCKET- MILL - 132 SERIES - 6.050" PITCH - C HUB | UHMW REPRO - 6 TEETH - 3" MAX BORE - 6" LTB



Interstate Plastics Suppliers