Excelon High-Pressure Tubing | Flexible PVC Pipe
 MouseOver to Zoom.






You Might Also be Interested In

Excelon Food Process Tubing | TPE Plastic Tubing

Excelon Flexible Thermoplastic Tubing | High-Heat Polyurethane Tube

Industrial-Grade Flexible Rubber Tubing Alternative | Excelprene

Flexible Chemical Transfer Tubing | Chemical Hoses

Transfer Tubing for Fuel & Lubricant | Excelon PVC Flexible Piping

HOME > PVC TYPE I > PLASTIC TUBING

Excelon High-Pressure Tubing | Flexible PVC Pipe

FDA Approved Tubing for Food Handling Applications



Get Your Online Pricing: Tips for measuring »

How To Measure and Cut-To-Size Policy [X]


Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

 .25" OD x .125" ID x 25 ft. Tubing - Bundle of 9
 .375" OD x .25" ID x 25 ft. Tubing - Bundle of 5
 .5" OD x .375" ID x 25 ft. Tubing - Bundle of 4
 .625" OD x .5" ID x 50 ft. Tubing - Bundle of 2
 .75" OD x .5" ID x 25 ft. Tubing - Bundle of 2
 .75" OD x .5" ID x 50 ft. Tubing
 1" OD x .75" ID x 25 ft. Tubing - Bundle of 2
 1.25" OD x 1" ID x 25 ft. Tubing
 2.5" OD x 2" ID x 25 ft. Tubing
 

Total Price: $182.75

 
As low as $17/month with

Overview Specs & Uses Reviews Inquiry
PVCCE TR - Overview

Flexible, non-toxic, and high performance, Excelon High-Pressure Tubing transfers beverages without affecting their taste, smell, or texture. It meets FDA, 3-A, and NSF requirements for safe food and beverage contact. This PVC tubing is equivalent to Tygon® B-44-3 and its excellent chemical resistance allows it to withstand virtually all non-solvent chemicals. It is clear to allow for easy observation of fluid transfer and flow.

While preferred for use in applications involving beverages, Excelon Beverage Tubing is widely used in non-beverage applications such as pharmaceutical and cosmetics processing.



Features

[PDF Spec Sheet]

  • Equivalent properties to Tygon® B-44-3
  • Non-toxic - meets FDA, 3-A, and NSF criteria for food and beverage contact
  • Resists nearly all non-solvent chemicals
  • Taste- and odor-free
  • Lightweight - easy to install
  • Flexible


Material Warnings

Material Warning WARNING: This product can expose you to chemicals including Polyvinyl Chloride, CAS 9002-86, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov .

WARNING: SHARP EDGES. Handle with care.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.

Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.



Interstate Plastics Suppliers