As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade.Please review our full return and shipping policy here.
Measure Twice, Cut Once
Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring Tape
Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End Hook
The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
Sanitizing Acrylic and Polycarbonate Sheet [X]
Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.
Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.
High density polyethylene sheet exhibits the properties of high impact strength and low coefficient of friction. The material is also moisture, stain and odor resistant. The material's durability makes it ideally suited for a variety of applications such as water tanks, chute linings and numerous industrial uses.
Note: HDPE is an industrial grade plastic with no protective masking. Scratches and scuffs on sheets are considered acceptable and are not a valid reason for returning this material.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.
Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored.
Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.
Storage: bottles, bottle caps, food containers, plastic bags, bins, laundry detergent bottles, fuel tanks, watering cans, lawn and garden products, storage sheds, geomembranes for hydraulic applications (such as canals and bank reinforcements) and chemical containment.
Piping Systems: chemical resistant piping systems, corrosion protection for steel pipelines, geothermal heat transfer piping systems, water pipes for domestic water supply, agricultural processes
Industrial: mechanical parts, tank linings, wear strips
Consumer: swimming pool installations, backpacking frames, banners, folding chairs and tables, hard hats, hula hoops, plastic lumber, fireworks
Outdoor Decks and Cabinetry: outdoor, decks, cabinetry, cooking areas, fireplaces
Boarding: arena board (puck board), moisture resistant body boards for morgues
Food and Beverage: FDA approved cutting board, cheese molds, frozen food molds:
Date
Review
2017-01-09
I did a will call order and found, at least in Sacramento, they have a great space. I find Interstate Plastics is very friendly to even to us small guys in the machining world. We really appreciated the support.
2016-03-29
Looks great. Shipping took nearly 2 weeks, but overall a good product.
2015-01-13
High quality pe sheet from a reliable supplier.
2014-04-28
Confused on pricing...
2014-04-28
Confused on pricing...
2014-02-25
High heat to winter cold, the material holds up very well and is on par with the quality we expect. They make online ordering very eazy.
2013-07-03
we ALWAYS buy our material from Interstate. They have competitive pricing, cut to size,and friendly customer service. Our material always arrives on time and when it doesn't they keep you in the loop. Thank you Interstate keep up the good work.
2013-03-07
We have this horrid wooden bench table in our daycare facility so we used this as a topper so the kids stop getting splinters. It works great and I like that it doesn't stain and the kids can eat their lunch without having to worry about bacteria.
2013-01-03
Lightweight, easily cut to correct size and doesn't absorb moisture.
2012-10-10
I got exactly what I ordered and it got to me even earlier than I expected. Fantastic.
2012-09-25
Overall the material was great but I needed specific cuts and the tolerance was off. They helped me out but in the future I was told ask for "nominal" cutting
4 stars based on 11 Review(s)
