As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade.Please review our full return and shipping policy here.
Measure Twice, Cut Once
Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring Tape
Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End Hook
The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
Sanitizing Acrylic and Polycarbonate Sheet [X]
Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.
Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.
Hydlar® Z natural plate from Ensinger plastics is an aramid fiber filled nylon plate that exhibits excellent wear properties and is easily machinable. It is an abrasion resistant plastic with the chemical designation polyamide 66. Its great strength and stiffness in addition to its good mechanical load bearing capacity makes it a good fit for applications such as construction, conveyor technologies, power engineering, mechanical engineering, and gear manufacturing.
In general, nylon plastic is a strong, stiff mechanical and engineering machinable thermoplastic with outstanding toughness, dimensional stability, wear resistance, availability, and versatility. Perfect for bearing and wear applications, nylon is frequently used to replace metal bearings and bushings, many times eliminating need for external lubrication.
Nylon has served well in replacing many metals and offers a design choice when noise reduction and long life are important.
Features
Excellent wear properties
Excellent strength and stiffness
Minimizes mating surface abrasion
Easily machined
High strength plate - good mechanical load capacity
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.
Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored.
Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.
Hydlar Z plates are used in a variety of applications, including the following:
Construction
Conveyor technologies
Gear manufacturing
Power engineering
Mechanical engineering
Customers who searched for this product also searched for: glass fiber reinforced nylon and fiberglass reinforced nylon.
