NAIL SALON MANICURE SNEEZE GUARD
 MouseOver to Zoom.






You Might Also be Interested In

PLASTIC SNEEZE GUARD & CASHIER PROTECTIVE PANELS | SNEEZEGUARDS

BREAK ROOM TABLE DIVIDERS

PORTABLE OFFICE BARRIERS

EMPLOYEE FACE GUARDS

QUARTER INCH HANGING SNEEZE GUARD | MOUNTED SNEEZE GUARD

HOME > SNEEZE GUARDS AND SHIELDS

NAIL SALON MANICURE SNEEZE GUARD

Portable salon plastic sneeze guards for manicures, pedicures, and other beauty treatments


Get Your Online Pricing: Sanitizing Acrylic and Polycarbonate »
Tips for measuring & cut-to-size policy »

How To Measure and Cut-To-Size Policy [X]


Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

Sanitizing Acrylic and Polycarbonate Sheet [X]


Acrylic and Polycarbonate Sneeze Guards and like products require special care while cleaning and disinfecting. To maintain the optical clarity of sneeze guards and other acrylic or polycarbonate items, use an acrylic or polycarbonate safe cleaner like Novus Plastic Polish #1, Brillianize Plastic Cleaner, or a mild soap solution.

Please reference the following compatible cleaners when DISINFECTING acrylic and polycarbonate items. The use of commonly available commercial alcohol or ammonia-based disinfectants may cause crazing and damage.

Compatible Polycarbonate Disinfectants:

• sBioMed Steriplex SD
• Safetec Surface Wipes
• Contec Healthcare Perodox RTU
• Contec Healthcare PS-911 EB Prostat Sterile Wipes

Compatible Acrylic Disinfectants:

• Pharmacy Grade Hydrogen Peroxide
• Household Bleach
• Isopropyl Alcohol (Water Diluted to 30% Strength)

[Download as a PDF]

 1/4" x 23.5" x 35.5" Nail Salon Manicure Sneeze Guard | 8" x 8" pass-through slot
 1/4" x 31.5" x 35.5" Nail Salon Manicure Sneeze Guard | 10" x 8" pass-through slot
 1/4" x 35.5" x 35.5" Nail Salon Manicure Sneeze Guard | 10" x 8" pass-through slot

Save with our Volume Pricing:
QuantityPrice Each
10->19$189.05
20->49$179.1
50+$169.15
 

Total Price: $199.00



Overview Specs & Uses Reviews Inquiry
MSCEADESKTOPSHIELD NAIL - Overview

American-made & ready to ship from one of our 10 nationwide locations.

Custom sizes, configurations, and machining services are available upon request. We customize guards for your specific application. CALL NOW! (888)-768-5759.

Please remove protective film before use.

Nail salon manicure sneeze guards are plastic sheets that guard against airborne threats to ensure client and manicurist safety during cosmetic beauty treatments. Made of completely clear plastic, these sneeze guards come with two removable curved base stands and will not disrupt the aesthetics of a salon. The built-in pass-through slot allows a client or manicurist to place both hands through for beauty treatments while remaining protected during face-to-face interactions. The dimensions of the pass-through slot are either 8" x 8" or 10" x 8", depending on the size of your chosen guard.

Nail salon manicure sneeze guards are simple to sanitize with standard non-abrasive cleaners – see our recommendations for cleaning and disinfecting sneeze guards.

Need a different size than what's listed? Custom sizes are available - call (888) 768-5759 for pricing and more information on sneeze guards.

Please note that all sneeze guard dimensions are nominal.



Features

More Information on Sneeze Guards »

Sneeze Guard & Safety Barrier Product Information [PDF]

Sanitizing Acrylic, Polycarbonate, & PETG Sheets [PDF]

  • Impedes airborne threats during face-to-face interactions
  • Clear plastic shield provides a clear view of the client
  • Excellent impact resistance
  • Pass-through slot easily lets hands and tools through
  • Rounded corners
  • Lightweight
  • Removable curved base stands allow for vertical or flat storage
  • Can be used as protection for beauty treatments or during client interactions
  • Made in the U.S.A.

Nail Salon Manicure Sneeze Guard Diagram

RETURN POLICY: Personal protection equipment (PPE) and barriers (PPB) are non-returnable and non-refundable. PPE and PPB products include, but are not limited to, "sneeze guards", "protective barriers", "cashier panels", "office barriers", as well as "guards" and "shields". For items damaged during shipping, please make a claim with the shipping company within 7 days from receipt of the delivery date. Please give the claim number to an Interstate Plastics representative at (888) 768-5759 so that the issue can be further examined and the appropriate actions are taken. For more information, please read our full shipping and returns policy.



Material Warnings

 WARNING: This product can expose you to chemicals including Ethyl acrylate, CAS 140-88-5, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including Bisphenol A, CAS 80-05-7 , which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.



Interstate Plastics Suppliers