As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade.Please review our full return and shipping policy here.
Measure Twice, Cut Once
Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring Tape
Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End Hook
The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
PEEK is high temperature-resistant engineered thermoplastic with excellent chemical and fatigue resistance and thermal stability. PEEK exhibits superior mechanical and electrical properties with a maximum continuous working temperature of 480°F and excellent retention of mechanical properties up to 570°F in a steam or high-pressure water environment. Superior chemical resistance has allowed PEEK to work effectively as a metal/stainless steel replacement in harsh environments, and has proven to be a reliable replacement for other materials that cost up to 10 times more.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.
Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored.
Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.
Because of its robustness, PEEK is used to fabricate items used in demanding applications where extreme heat, pressure, and chemicals come into play.
Bearings
Piston Parts
HPLC columns
Compressor plate valves
Cable insulation
Medical implants
Aerospace applications
Chemical process applications
Date
Review
2016-11-14
Great service and reasonable price
2016-01-28
wrong diameter!!! had to send back!
2015-08-21
Ordering was straightforward and easy. We called them, gave the dimensions and were able to pick the PEEK up on our own truck later that week. Friendly folks.
2014-09-26
Needed tube. Couldn't find on their website but gave Interstate a call and found them helpful and they tracked down peek tube.
2014-08-04
We were extremely happy with customer service and will be ordering again!
2014-03-05
We run this in bearings, full continuous use at 135 Celsius (that's 275F for you americans) and it holds up great. The wear life is pretty incredible for the heat. Reasonable pricing, shipping took longer than expected but they informed me it would, and customer service was excellent.
2014-01-02
We really appriciate all the sourcing help interstate plastics has given us. They guided us to peek after many a conversation over our applications and what we were trying to accomplish with bearings. A great honest and PATIENT company.
2013-12-17
The best price on the web. I've ordered three times, one order took almost three weeks. Besides that incident ive been very pleased.
2013-10-30
Very easy to order from Interstate Plastics. We have called in our orders and ordered online and both ways were quick and hassle free.
2013-07-19
A reliable product but the specs should be listed. PEEK has a poor resistance to certain acids in concentrated form, as we found out with phosphoric and oxalic acids.
2013-06-18
The best high heat material I know of for bearings. We purchase regularly and have rarely had a problem. The one or two times we did have an issue (two of the rods came damaged), Interstate fixed everything quickly and got us new material.
2013-05-13
Interstate Plastics has the best price we have found. Your website makes if fairly hassle-free. Would recommend.
2013-01-22
The salesperson was very knowledgeable and after telling him my project, helpful of knowing exactly what I would need.
2012-09-28
I would really like to see Interstate stock more PEEK on the east coast, but you guys have the best price. It's still cheaper after shipping. PLEASE STOCK MORE!
4
stars based on
14 Review(s)
