Providing Solutions in Plastics Interstate Plastics

  
(888) 768-5759

Plastic experts are
available to assist you:
8AM-5PM PST Mon-Fri
 
Get A Quote
Buy More,
Save More!
LOG IN >>
TOTAL: $0 (0 Item)

PETG MULTI-PACK FOR THERMOFORM VACUUM THERMOFORMER
 MouseOver to Zoom.






You Might Also be Interested In

ABS MULTI-PACK FOR THERMOFORM VACUUM THERMOFORMER

KYDEX® MULTI-PACK FOR THERMOFORM VACUUM THERMOFORMER

POLYCARBONATE MULTI-PACK FOR THERMOFORM VACUUM THERMOFORMER

STYRENE MULTI-PACK FOR THERMOFORM VACUUM THERMOFORMER

THERMOFORMING MATERIAL SAMPLE PACK

PETG MULTI-PACK FOR THERMOFORM VACUUM THERMOFORMER

Multi-Pack Sheets of .060x12x12" Clear PETG Sheets



Get Your Online Pricing: Tips for measuring & cut-to-size policy »
How To Measure and Cut-To-Size Policy | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

5 PACK - .060x12x12" Clear PETG Sheets$23.99
10 PACK - .060x12x12" Clear PETG Sheets$36.59
20 PACK - .060x12x12" Clear PETG Sheets$58.79
 

Total Price: $23.99

 

Overview Specs & Uses Reviews Inquiry
THERMOFORMPACKPTGCE12x12x060 - Overview

PETG thermoplastic sheets offer superior impact strength over acrylic and cost effectiveness compared to polycarbonate, while being easy to machine and thermoform for applications including prototyping, model making, machine housings, molds and POP displays to name a few.

With the thermoFORM system, PETG is heated to a pliable forming temperature and shaped in a mold. The PETG Bundle Pack includes multiple 12x12" sheets of clear PETG in a thickness of 0.060", perfect for use with the ThermoFORM Vacuum Forming System.



Features

  • Prototyping
  • Architectural Design
  • Model Making
  • Signage
  • Repairing & Replacing Plastic Parts
  • Tabletop Gaming
  • Costume Design
  • Quick Molds for Jello, Chocolate, Soap, Candles, etc.
  • Making Just About Anything!




Resources
About Us
Privacy Policy
Terms & Conditions
Shipping & Returns
website uptime
Need Help?
Contact Us
FAQ
Advanced Search
Sitemap
Contact Information
Phone: (888) 768-5759
330 Commerce Circle
Sacramento, CA 95815 dennis.g@interstateplastics.com
Career

TIPS, TRICKS & DISCOUNTS FROM OUR PLASTICS EXPERTS!