PVDF Welding Rod | Kynar
 MouseOver to Zoom.

You Might Also be Interested In

Interstate Advanced Materials Membership

PVC CRP-1 | FM4910 PVC Welding Rod

PVDF Kynar® 740 (FM4910) Sheet

PVC CRP-1 | FM4910 PVC Sheet

LAM 2000® | CPVC (FM4910) Clear/Blue Sheet


PVDF Welding Rod | Kynar

FM4910 rated flame resistant welding rod for semiconductor clean rooms and electrical equipment applications

Get Your Online Pricing: Tips for measuring »

How To Measure and Cut-To-Size Policy [X]

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

.156" dia. PVDF Kynar Welding Rod - Coiled - 5 Pounds

Total Price: $700.00

As low as $65/month with

Overview Specs & Uses Reviews Inquiry
PVDNE RW - Overview

PVDF Kynar® welding rod is FM4910 and UL 94 V-0 fire rated for use in semiconductor clean rooms and electrical equipment applications. This engineering thermoplastic has exceptional resistance to acids and ultra-pure water. Also known by the brand name Kynar®, PVDF features higher stiffness and temperature resistance versus PVDF-C 2850, but slightly lower impact resistance and flexibility. Both perform well in chemical environments and are exceptionally resistant to concentrated acids and ultra-pure water in a wide temperature range.

In general, PVDF Kynar® has seen use in following applications:

  • Semiconductor process tanks and components
  • Chemical process tanks and components
  • Wetted parts (component in direct contact with fluid under pressure)
  • Fume hoods and ducting
  • DI water and acid etch systems
  • Scientific and laboratory equipment

  • FM 4910 and UL94 V-0 fire rated
  • Service temperatures up to 250?F (121?C)
  • Exceptional UPW (ultra-pure water) and acid resistance
  • Welds to PVC CRP-1
  • High purity/low extractables
  • High abrasion, chemical, UV, and radiation resistance
  • Low permeability

Material Warnings

Material Warning  WARNING: This product can expose you to chemicals including Tetrafluoroethylene, CAS 116-14-3, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Material Warning WARNING: This product can expose you to chemicals including Tetrafluoroethylene, CAS 116-14-3, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

WARNING: SHARP EDGES. Handle with care.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.

Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.

Interstate Plastics Suppliers