Industrial-Grade Flexible Rubber Tubing Alternative | Excelprene
 MouseOver to Zoom.






You Might Also be Interested In

Excelon Food Process Tubing | TPE Plastic Tubing

Excelon Flexible Thermoplastic Tubing | High-Heat Polyurethane Tube

Excelon High-Pressure Tubing | Flexible PVC Pipe

Flexible Chemical Transfer Tubing | Chemical Hoses

Transfer Tubing for Fuel & Lubricant | Excelon PVC Flexible Piping

HOME > PLASTIC TUBING

Industrial-Grade Flexible Rubber Tubing Alternative | Excelprene

Excelprene is a high-performance alternative to rubber tube, Tygon® A-60-G, Norprene, and EPDM industrial tubing.



Get Your Online Pricing: Tips for measuring »

How To Measure and Cut-To-Size Policy [X]


Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under "Comments" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2" has a bigger mark than 1/4" which has a bigger mark than 1/8". The smallest mark follows at 1/16". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).

 .375" OD x .187" ID x 25 ft. Tubing - Bundle of 7
 .375" OD x .25" ID x 25 ft. Tubing - Bundle of 6
 .437" OD x .25" ID x 25 ft. Tubing - Bundle of 4
 

Total Price: $237.27


Manufacturer processing fee (included in price): $75
 
As low as $22/month with

Overview Specs & Uses Reviews Inquiry
PURBT TR - Overview

Made from a thermoplastic elastomer (TPE), Excelprene Industrial Grade tubing is high performance, abrasion resistant, and high temperature resistant. It provides extended service life in many applications without cracking or weakening and withstands extreme temperatures from -75°F to 275°F. Industrial grade Excelprene outperforms general-purpose rubber tubing and has excellent corrosion resistance.

Excelprene Industrial Grade tubing is equivalent to Tygon® Norprene A-60-G. For FDA compliant Excelprene, please see Excelprene Beverage tubing.



Features

[PDF Spec Sheet]

  • Abrasion resistant
  • Extreme temperature resistance
  • Heat sealable
  • Outperforms general-purpose rubber tubing
  • Excellent corrosion resistance
  • Long service life
  • Resists cracking when used in vacuum systems
  • Resists light, ozone
  • Equivalent to Tygon® Norprene A-60-G


WARNING: Sharp Edges! Handle with care.
Warning: This product may have sharp edges and points. Contact may result in injury. Handle with care.

Disclaimer: Interstate Plastics makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.



Interstate Plastics Suppliers